KTI Networks KF223TX, KF230TX manual Running Setup Program

Page 14

4. Setup Program

4.1 Running Setup Program

One setup program, SETUP.EXE, is contained in the adapter driver diskette. The Setup program is a DOS program for you to perform the following functions from its main menu as illustrated in Figure 4-1:

Install menu: supports a quick method to install NetWare DOS ODI client driver on your computer. It also provides the instructions for installing drivers for various operating systems.

Setup menu: enable full-duplex mode for Connectivity test.

Diagnostics menu: performs diagnostic tests for the adapter. A Con- nectivity test is also provided in this menu for testing the network connection between two computers that each one is installed one PCI adapter.

Figure 4-1 Main Menu of the Setup Program

9

Image 14

Contents Installation Guide 10/100 Dual-speed Fast Ethernet PCI AdaptersUnited States InternationalTrademarks Fast Ethernet PCI Adapters Installation Guide Figures Adapter Features IntroductionConnector and LEDs Network Connector and LEDsInstalling the Adapter Installing the AdapterConnecting to the Network Inserting the Adapter into the PCI SlotConnecting 10BASE-T Cable Mbps ConnectionConnecting 100BASE-TX Cable Network Driver Installation Driver InformationPCI Bios Setup Setup Program Running Setup ProgramBefore running the program Starting the Setup Program Asetup enterFunctions on the Main Menu Running Install MenuInstall NetWare DOS ODI driver Running Setup Menu Setup MenuRunning Diagnostics Menu Diagnostics MenuPage Page LED Indicators InterpretationsA1. Specifications AppendixA2. RJ-45 Connector & Cables Pin Signal NameAn auto-negotiation device Duplex mode half-duplex or full-duplexAuto-negotiation Function Non-auto-negotiation deviceDiagnostics Report Installing Remote Boot ROM