KTI Networks KF223TX, KF230TX manual Running Setup Menu

Page 18

Running "Setup" Menu

This menu allows you to configure full-duplex mode for the adapter before running Connectivity test.

Figure 4-4 Setup Menu

"Auto Detection" selection allows adapter to configure du- plex mode automatically. "Full Duplex Enabled" selection will force the adapter to use full duplex mode.

This setting will not be effective after any network driver is loaded or the computer is reboot.

Image 18

Contents Installation Guide 10/100 Dual-speed Fast Ethernet PCI AdaptersUnited States InternationalTrademarks Fast Ethernet PCI Adapters Installation Guide Figures Adapter Features IntroductionConnector and LEDs Network Connector and LEDsInstalling the Adapter Installing the AdapterConnecting to the Network Inserting the Adapter into the PCI SlotConnecting 10BASE-T Cable Mbps ConnectionConnecting 100BASE-TX Cable Network Driver Installation Driver InformationPCI Bios Setup Setup Program Running Setup ProgramBefore running the program Starting the Setup Program Asetup enterRunning Install Menu Install NetWare DOS ODI driverFunctions on the Main Menu Running Setup Menu Setup MenuRunning Diagnostics Menu Diagnostics MenuPage Page LED Indicators InterpretationsA1. Specifications AppendixA2. RJ-45 Connector & Cables Pin Signal NameAn auto-negotiation device Duplex mode half-duplex or full-duplexAuto-negotiation Function Non-auto-negotiation deviceDiagnostics Report Installing Remote Boot ROM