Starting the Setup Program
To start the Setup program, follow these steps:
1.Insert the adapter driver diskette labeled "1 of 2" into floppy disk drive A:.
2.Execute the following command from DOS prompt:
A>SETUP <enter>
A screen appears showing a menu bar on top of the screen and an information window for the first adapter found in the computer on the bottom portion of the screen as illustrated in the following figure:
Figure 4-2 Adapter Information
When Multiple Adapters are installed
If multiple adapters are found, you may press [PgDn] or [PgUp] to browse the information of each adapter and select a adapter for the optional menus (Setup and Diagnostics).
11