KTI Networks KF223TX, KF230TX manual

Page 20

To set up an echo station, follow these steps:

1.Install another adapter which is known to have no problem into a second computer as instructed in Chapter 2.

2.Run SETUP.EXE on that computer.

3.Press [F10] and press [® ] to select "Diagnostics" from the main menu.

4.Select "Connectivity Test" and press [Enter].

5.Select "Start Echo Station Test" from "Connectivity Test" pop-up window and press [OK]. The computer becomes an echo station. It will receive every packet with address 00 11 11 11 11 11 and echo the packets back to the adapter from which the packets were sent.

You may start the Connectivity Test for the adapter after an echo station has been set up. Follow these steps:

1.Press [PgDn] or [PgUp] to select the adapter you want to test.

2.Press [F10] and press [® ] to select "Diagnostics" from the main menu.

3.To configure the number of packets to be performed for the "Network Link Test" in step 4, you may select "Test Configura- tion" item from the pop-up menu to enter the number:

15

Image 20
Contents Installation Guide 10/100 Dual-speed Fast Ethernet PCI AdaptersUnited States InternationalTrademarks Fast Ethernet PCI Adapters Installation Guide Figures Adapter Features IntroductionConnector and LEDs Network Connector and LEDsInstalling the Adapter Installing the AdapterConnecting to the Network Inserting the Adapter into the PCI SlotConnecting 10BASE-T Cable Mbps ConnectionConnecting 100BASE-TX Cable Network Driver Installation Driver InformationPCI Bios Setup Setup Program Running Setup ProgramBefore running the program Starting the Setup Program Asetup enterFunctions on the Main Menu Running Install MenuInstall NetWare DOS ODI driver Running Setup Menu Setup MenuRunning Diagnostics Menu Diagnostics MenuPage Page LED Indicators InterpretationsA1. Specifications AppendixA2. RJ-45 Connector & Cables Pin Signal NameDuplex mode half-duplex or full-duplex Auto-negotiation FunctionAn auto-negotiation device Non-auto-negotiation deviceDiagnostics Report Installing Remote Boot ROM