Kramer Electronics Technical Specifications, FC-8technical specifications are shown in Table

Page 17

Technical Specifications

8Technical Specifications

The FC-8technical specifications are shown in Table 5:

Table 5: FC-8 Technical Specifications1

INPUT:

RS-232 DB9F connector

OUTPUT:

Antenna

HARDWARE DESCRIPTION:

Core CPU: 32-bit RISC ARM7TDMI, low-leakage, 0.13 micron, running at

 

48MHz

 

Operating Voltage (input): 12VDC 70mA

 

RoHS-compliant; lead-free

PERFORMANCE

RS-232: Asynchronous character; binary; 7 or 8 data bits; odd, even, or no

SPECIFICATIONS:

parity; 1 stop bit

 

Flow Control: Hardware (RTSH, CTSH) and software flow control

STANDARDS SUPPORTED:

IEEE 802.11b, IEEE 802.11g

FREQUENCY:

Europe: 2.412 to 2.472GHz

 

USA: 2.412 to 2.462GHz

CHANNELS:

Europe: 13 channels

 

USA: 11 channels

TRANSMIT POWER LEVELS:

802.11b: 17dBm

 

802.11g: 17dBm

RECEIVE MINIMUM INPUT

11Mbps: -86dBm

LEVEL SENSITIVITY:

54Mbps: -72dBm

INTERNET PROTOCOLS:

ARP, ICMP, IP, UDP, TCP, DHCP, DNS, NTP, SMTP

SECURITY PROTOCOLS:

WEP, WPA and WPA2

PROTOCOLS ACCELERATED

AES, 3DES and SHA

IN HW:

 

APPLICATION PROGRAM

Kramer configuration program ± Configure a factory default: Ad hoc net,

INTERFACE:

permanent IP, DHCP server and serialNET mode.

 

Kramer application Web page, enabling changing Net details, Security and IP

PROTOCOLS:

HTTP web server with two on-chip websites: configuration site and

 

application site.

 

DHCP client and server

OPERATING HUMIDITY:

90% max., non-condensing

OPERATING

-40°to 85°C (-40°to 185°F)

TEMPERATURE:

 

DIMENSIONS:

12cm x 7.5cm x 2.5cm (4.7" x 3.0" x 1.0") W, D, H

WEIGHT:

0.3kg (0.7lbs)

ACCESSORIES:

12V DC power supply, antenna, null-modem adapter

1 Specifications are subject to change without notice

13

Image 17
Contents Model Page Tables ContentsPage Getting Started IntroductionQuick Start Overview Your FC-8 Wi-Fi RS-232 BridgeYour FC-8 Wi-Fi RS-232 Bridge Connecting the Controlled Device to the FC-8 Connecting the FC-8 Wi-Fi RS-232 BridgeConnecting the FC-8 to a Network Configuring the FC-8 Wi-Fi RS-232 BridgeConfiguring the Host System to Operate with FC-8 Using the Default Network ConfigurationWireless Network Connection Window Changing the FC-8 ConfigurationSerial Net Configuration Screen of the FC-8 FC-8 Serial Net Configuration Parameters Baud Rate Settings Operating the FC-8 Configuring an Active StationFC-8technical specifications are shown in Table Technical SpecificationsPage 2900-000358 REV