Configuring the FC-8 Wi-Fi - RS-232 Bridge
Figure 4: Wireless Network Connection Window
5.If the Kramer-FC8 network does not connect:
Click on Kramer-FC8to open the network and click Change Advanced Settings.
Choose to highlight Internet Protocol (TCP/IP) and click Properties.
Make sure Obtain an IP address automatically is selected.
6.Begin operating the device as described in section 7 or if necessary, change the FC-8configuration as described in section 6 .3.
6.3Changing the FC-8 Configuration
The FC-8is normally configured to work as a listening station in an ad-hoc, peer-to-peer network or over an access point such as a router to connect to the Internet. (To configure the FC-8as an active station, see section 6 .4.)
To connect the FC-8to another network you must change its configuration using a built-in Web page configuration program over an Internet browser.
8 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
|
