Kramer Electronics user manual Your FC-8 Wi-Fi RS-232 Bridge

Page 8

Your FC-8 Wi-Fi - RS-232 Bridge

Figure 1: FC-8 Wi-Fi - RS-232 Bridge Front and Back Views

Table 1: FC-8 Wi-Fi - RS-232 Bridge Front and Back Functions

#	Feature	Function
1	12V DC Connector	+12V DC for powering the unit
2	FACTORY RESET Button	When pressed, erases all configuration data. Use only under the guidance
		of Kramer Technical Support.
3	RS-232DB-9F Port	Connects to the controlled device via a null-modem connection
4	WI-FIAntenna	Transmits and receives signals over the wireless network
5	LINK LED	Illuminates green when there is a link
6	TX LED	Illuminates green when transmitting data over the wireless connection
7	RX LED	Illuminates green when receiving data over the wireless connection
8	ON LED	Illuminates green when power is supplied

4	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 8

Contents Model Page Contents TablesPage Introduction Getting StartedQuick Start Your FC-8 Wi-Fi RS-232 Bridge OverviewYour FC-8 Wi-Fi RS-232 Bridge Connecting the FC-8 Wi-Fi RS-232 Bridge Connecting the Controlled Device to the FC-8Configuring the FC-8 Wi-Fi RS-232 Bridge Connecting the FC-8 to a NetworkUsing the Default Network Configuration Configuring the Host System to Operate with FC-8Changing the FC-8 Configuration Wireless Network Connection WindowSerial Net Configuration Screen of the FC-8 FC-8 Serial Net Configuration Parameters Baud Rate Settings Configuring an Active Station Operating the FC-8Technical Specifications FC-8technical specifications are shown in TablePage 2900-000358 REV