Elo TouchSystems AMM170TK2, AMM18TK2, AMM17TK2, AMM19TK2 Safety Precaution, Cleaning Your Monitor

Page 14

14User’s Guide

SAFETY PRECAUTION

Avoid placing the monitor, or any other heavy object, on the power cord to prevent fire or electrical shock from damage to the power cord.

Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock hazard.

Do not cover the slots or openings of the monitor for proper heat dissipation. Always put the monitor in a place where there is adequate ventilation.

Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the area of the monitor. Place the monitor just below eye level.

Handle with care when transporting the monitor.

Refrain from giving the shock or scratch to the screen, as screen is fragile.

CLEANING YOUR MONITOR

No specific liquid or chemical necessary when cleaning this LCD monitor

However, we suggest to clean the monitor with non-abrasive cloths and cleaning solutions used in hospitals to clean similar equipment. We recommend using 70% Isopropyl alcohol for the screen surface and warm water and a mild detergent for all other surfaces. Other acceptable cleaning agents are listed below:

70% isopropyl alcohol

6% aqueous ammonia

Cidex (2.4% glutaraldehyde solution)

Sodium Hypochlorite (bleach) 10%

“Green soap” USP

0.5% Chlorhexidine in 70% isopropyl alcohol

Ovation

Formula 409

Fantastic

Wex Cide

To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away Form the monitor and spray cleaning solution onto a cloth. Without applying excessive pressure, clean the screen with the slightly dampened rag.

Image 14
Contents Back of the monitor Revision ControlTable of Contents Press Properties to execute the Display Properties To change the resolution to its factory recommended presetScreen Adjustment Procedure To change the resolution to its factory recommended preset Press the Auto button on the monitor Introduction Product Description and Intended UseProduct Description Warranty is void if any of these warnings are disregarded Do not Sterilize Monitor User’s Guide Symbol Definitions EU Declaration of Conformity for Medical Applications Screen Position Adjustment Safety Precaution Cleaning Your MonitorPreset Modes Ode Resolution H x Freq. KHz Freq. HzSuspend Mode Power Management FunctionStand-by Mode Off ModeSteps InstallationDDC Connecting to a Television Signal Video and SoundStandard OSD Operation User ControlsFront Panel Controls OSD Scren Basic Section VGA Push the select button to execute the Zoom function OSD Scren Basic Section DVI OSD Scren Basic Section DVI OSD Scren Basic Section C-Video or S-Video Push the select button to execute Recall OSD Function Description Under Analog Display Ite m Function De s criptionOSD Function Description Under Digital Display OSD Function Description Under C-Video or S-Video Display Troubleshooting LED OFFSpecification AMM170TK2AMM17TK2 AMM18TK2 AMM19TK2 AMM19TK2/HB Classification User’s Guide AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB User’s Guide AMM170TK2, AMM17TK2, AMM18TK2, AMM19TK2HB Touch Port ConnectorsVideoInput Limitation of Warranty Commencement and Duration of WarrantyPlace of Repair or Replacement Touch ScreenInstallation Technical Assistance ServiceQuick Start Touchmonitor installation Cable Connection AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB