Elo TouchSystems AMM19TK2, AMM18TK2, AMM17TK2, AMM170TK2 manual Quick Start

Page 43

AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2(HB) 43

Tounchscreen User's Manual (AMM170TK2-TE/AMM17TK2-TE/ AMM18TK2-TE/AMM19TK2-TE/AMM19TK2(HB)-TE or AMM170TK2-TEW/AMM17TK2-TEW/AMM18TK-TEW/AMM19TK2- TEW/AMM19TK2(HB)-TEW)

Quick Start

1.Connect Power Code and VGA Cable of LCD Monitor. 2.Connect Touchscreen DB9 male RS-232 cable. 3.Turn the LCD display Power ON.

4.Adjust the tilt of LCD Monitor. 5.Adjust the Picture of LCD Monitor.

6.Install driver software of Touchscreen (See "Driver software" for details).

7.Adjust the calibration of Touchscreen (See "Driver software" for details).

Introduction

The ELO IntelliTouch Touchscreen system consists of a touchscreen and an electronic touchscreen controller. The touchscreen may be a flat, spherical, or cylindrical and is installed over the face of the LCD. The touchscreen controller installed inside of theLCD.

The IntelliTouch Touchscreen

The IntelliTouch surface wave touchscreen consists of a glass panel molded to the precise shape of a display's face. A scratch-resistant, hard-coated plastic cover

sheet may be clear for best image clarity or have an antiglare finish.

The IntelliTouch Controller

The IntelliTouch controllers provide the drive signal for touchscreen, convert the received analogue signals into digital touch coordinates, and send these

coordinates to the computer.

Image 43

Contents Revision Control Back of the monitorTable of Contents Screen Adjustment Procedure To change the resolution to its factory recommended presetPress Properties to execute the Display Properties To change the resolution to its factory recommended preset Press the Auto button on the monitor Product Description and Intended Use IntroductionProduct Description Warranty is void if any of these warnings are disregarded Do not Sterilize Monitor User’s Guide Symbol Definitions EU Declaration of Conformity for Medical Applications Screen Position Adjustment Cleaning Your Monitor Safety PrecautionOde Resolution H x Freq. KHz Freq. Hz Preset ModesOff Mode Power Management FunctionStand-by Mode Suspend ModeDDC InstallationSteps Video and Sound Connecting to a Television SignalFront Panel Controls User ControlsStandard OSD Operation OSD Scren Basic Section VGA Push the select button to execute the Zoom function OSD Scren Basic Section DVI OSD Scren Basic Section DVI OSD Scren Basic Section C-Video or S-Video Push the select button to execute Recall Ite m Function De s cription OSD Function Description Under Analog DisplayOSD Function Description Under Digital Display OSD Function Description Under C-Video or S-Video Display LED OFF TroubleshootingAMM170TK2 SpecificationAMM17TK2 AMM18TK2 AMM19TK2 AMM19TK2/HB Classification User’s Guide AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB User’s Guide AMM170TK2, AMM17TK2, AMM18TK2, AMM19TK2HB VideoInput ConnectorsTouch Port Touch Screen Commencement and Duration of WarrantyPlace of Repair or Replacement Limitation of WarrantyTechnical Assistance Service InstallationQuick Start Touchmonitor installation Cable Connection AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB