4User’s Guide
Quick Setup (IBM/IBM Compatible under Windows NT 4.0) Please Read Carefully When Setting Up Your New Monitor
Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible Computers with Windows based OS system.
Before adjusting the monitor, all the necessary drivers should be installed to your System and resolution has to be set to manufacture’s recommended preset of 1280 x 1024 @ 60Hz, 70Hz, 72Hz or 75Hz.
To check the resolution, press the “UP” button on the monitor and the “Information” will display under the OSD. Information will have Resolution, Horizontal and Vertical (Refresh rate) frequency information.
To change the resolution to its factory recommended preset.
1.On a Windows NT 4.0, press right button on a Mouse to execute the
2.Press “Properties” to execute the “Display Properties”
3.Press “Setting” and change the resolution to 1280 x 1024.
4.Change “Refresh Frequency” to 60Hz, 70Hz, 72Hz or 75Hz. (60Hz recommended)
Screen Adjustment Procedure
1.Press the “AUTO” button.
2.If you still don’t have a clear display monitor, please refer to step 3.
3.Start “Shut Down” in Windows 95/98/ME/2000 - It will display moire on screen
4.Press “Up” button then the OSD menu will
5.Adjust the “Frequency” under the OSD to reduce or get rid of the vertical display noise (Jail bars).
6.Once the vertical display noise disappears, press adjust the “Phase” to reduce or get rid of the horizontal display noise (Snowy effect).