Elo TouchSystems AMM19TK2, AMM18TK2 To change the resolution to its factory recommended preset

Page 3

AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2(HB) 3

Quick Setup (IBM/IBM Compatible under Windows 95/98/ME/2000) Please Read Carefully When Setting Up Your New Monitor

Monitor Screen Adjustment and Resolution Setting Procedure for IBM/IBM Compatible Computers with Windows based OS system.

Before adjusting the monitor, all the necessary drivers should be installed to your System and resolution has to be set to manufacturer’s recommended preset of 1280 x 1024 @ 60Hz, 70Hz, 72Hz or 75 Hz.

To check the resolution, press the “UP” button on the monitor and the “Information” will display under the OSD. Information will have Resolution, Horizontal and Vertical (Refresh rate) frequency information.

To change the resolution to its factory recommended preset.

1.On a Windows 95, 98, ME or 2000, press right button on a Mouse to execute the Pop-up menu.

2.Press “Properties” to execute the “Display Properties”

3.Press “Setting” and change the resolution to 1280 x 1024.

4.Press “Apply or OK” to select and press “OK” to keep the selected resolution.

5.Go back to “Display Properties” - “Setting” - “Advanced properties” - “Adapter”

6.On Adapter property, change the refresh rate to 60Hz, 70Hz, 72Hz or 75Hz. If you don’t have these options, choose “Adapter Default”. (60Hz recommended)

Screen Adjustment Procedure

1.Press the “AUTO” button.

2.If you still don’t have a clear display monitor, please refer to step 3.

3.Start “Shut Down” in Windows 95/98/ME/2000 - It will display moire on screen

4.Press “Up” button then the OSD menu will pop-up.

5.Adjust the “Frequency” under the OSD to reduce or get rid of the vertical display noise (Jail bars).

6.Once the vertical display noise disappears, press adjust the “Phase” to reduce or get rid of the horizontal display noise (Snowy effect).

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Revision Control Back of the monitorTable of Contents To change the resolution to its factory recommended preset Screen Adjustment ProcedurePress Properties to execute the Display Properties To change the resolution to its factory recommended preset Press the Auto button on the monitor Product Description and Intended Use IntroductionProduct Description Warranty is void if any of these warnings are disregarded Do not Sterilize Monitor User’s Guide Symbol Definitions EU Declaration of Conformity for Medical Applications Screen Position Adjustment Cleaning Your Monitor Safety PrecautionOde Resolution H x Freq. KHz Freq. Hz Preset ModesOff Mode Power Management FunctionStand-by Mode Suspend ModeInstallation DDCSteps Video and Sound Connecting to a Television SignalUser Controls Front Panel ControlsStandard OSD Operation OSD Scren Basic Section VGA Push the select button to execute the Zoom function OSD Scren Basic Section DVI OSD Scren Basic Section DVI OSD Scren Basic Section C-Video or S-Video Push the select button to execute Recall Ite m Function De s cription OSD Function Description Under Analog DisplayOSD Function Description Under Digital Display OSD Function Description Under C-Video or S-Video Display LED OFF TroubleshootingAMM170TK2 SpecificationAMM17TK2 AMM18TK2 AMM19TK2 AMM19TK2/HB Classification User’s Guide AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB User’s Guide AMM170TK2, AMM17TK2, AMM18TK2, AMM19TK2HB Connectors VideoInputTouch Port Touch Screen Commencement and Duration of WarrantyPlace of Repair or Replacement Limitation of WarrantyTechnical Assistance Service InstallationQuick Start Touchmonitor installation Cable Connection AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2HB
Top Page Image Contents