Canon LV-7325U Basic Operations, Turning on / OFF the Projector, Turning on the Projector, Green

Page 20

BASIC OPERATIONS

TURNING ON / OFF THE PROJECTOR

TURNING ON THE PROJECTOR

1	Complete the peripheral connections (with Computer, VCR,
1	etc.) before turning on the projector. (Refer to "CONNECTING
	TO THE PROJECTOR" on Pages 10~13 for connecting that
	equipment.)
2	Connect the projector's AC power cord into a wall outlet. The
2	LAMP indicator lights RED, and the READY indicator lights
	GREEN.
3	Press the power ON-OFF button on the Remote Control Unit or
3	on the Top Control to ON. The LAMP POWER indicator dims,

and the Cooling Fans start to operate. The Preparation Display appears on the screen and the count-down starts. The signal from the source appears after 30 seconds.

30

The Preparation Display disappears after 30 seconds.

	TURNING OFF THE PROJECTOR
1	Press the power ON-OFF button on the Remote Control Unit or
1	on the Top Control, and the message "Power off?" appears on
	the screen.
2	Press the power ON-OFF button again to turn off the projector.
2	The LAMP indicator lights bright and the READY indicator turns
	off. The Cooling Fans operate for 90 seconds after the
	projector is turned off. (During this "Cooling Down" period, this
	appliance cannot be turned on.)
3	When cooling the projector has finished, the READY indicator
3	turns to green again and you can turn the projector on. After

cooling down completely, disconnect the AC power cord.

Power off?

The message disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1.Disconnect the AC power cord from the AC outlet.

2.Check the air filters for dust accumulation.

3.Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 42.)

4.Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service station.

NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

20

Image 20

Contents LV-7325U Risk of Electric Shock Do not Open Safety PrecautionsTo the Owner Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPower Cord Connector PreparationName of Each Part of the Projector Exhaust VentPositioning the Projector SETTING-UP the ProjectorAdjustable Feet Projector side Female AC outlet side Male Preparation Connecting the AC Power CordVentilation Preparation Mounting Lens Cover Moving the ProjectorConnecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorCables used for connection Video CableMAC Adapter Monitor Cable Connecting to the ComputerVGA Cable Control Cable for PS/2 Port Computer Monitor Control Audio OUT Port MAC Adapter Not suppliedLaser Pointer Function Operation of the Remote ControlBefore Operation Remote Control Battery Installation Operating RangeTOP Controls and Indicators Flow of ON-SCREEN Menu HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR View Menu Basic Operations Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorAdjusting the Image Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Selecting Computer System Computer ModeSelecting Computer Mode PC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampComputer Mode Compatible Computer Specifications ResolutionFreq KHzAdjust Picture Image Manually Normal FunctionPosition Picture Position AdjustmentComputer Mode Auto Image Function Picture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Color System AutoAdjusting the Picture Image Quit Closes the Picture Image Adjustment MenuColor TintMCI Mode HOW to Load the Memory Card Into the ProjectorOperating the PC Card Slot LoadAvailable Card Selecting MCI ModeMCI Mode Available Data Selection Show the Data in the Memory CardIndex Selection Access to the Memory Card Through the Projector Write Data Into the Memory CardImage Picture Image AdjustmentAdjust the Picture Image Manually Picture Screen Adjustment CF Card and Pcmcia Adapter Inserting / Removing the CF CardHandling CF Card and Pcmcia Adapter Selecting Language SettingSetting Menu Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensLamp Replacement Monitor Timer Appendix Lamp Replacement IndicatorLamp Replacement Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Optional Parts Canon U.S.A., INC. NEW York Office