Canon LV-7325U owner manual PC Adjustment

Page 24

COMPUTER MODE

PC ADJUSTMENT

This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce a proper image and the image is recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has PC ADJUSTMENT function, to enable you to precisely adjust several parameters to match with those exceptional signal formats and the projector has five independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUSTMENT function cannot be operated when “RGB,” “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P23 and 26).

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT RIGHT/LEFT buttons to select PC

 

ADJUST

and press the SELECT button. Another dialog

 

box “Where to reserve” Menu will appear.

2

In this dialog box, you can store the parameter into the area

from “Mode 1” to “Mode 5.” When memorizing the new

 

computer parameter, select the Mode with the message of

 

“Free” by pressing the POINT UP/DOWN buttons and the

 

SELECT button. To change the parameters of the Mode

 

previously set, select the Mode with “Stored.”

3

 

 

When the Mode is selected, Parameter adjustment dialog box

appears. Move the arrow to the item that you want to change

 

 

by pressing the POINT UP/DOWN buttons, and adjust each

 

 

item to match your computer. To change the value, press

 

 

either the POINT RIGHT button or the POINT LEFT button.

 

 

Refer to the next page for adjusting each item.

 

4

 

 

Move the arrow to “Stored” and press the SELECT button. The

parameter is memorized in the selected Mode.

5

To activate the Mode manually adjusted in this PC

ADJUSTMENT Menu, select the Mode at the SYSTEM

SELECT Menu. (Refer to page 23.)

This Mode has para- meters being stored.

The Vacant Mode.

Manual set Computer

Mode (1 to 5).

Close the PC

ADJUSTMENT Menu.

Press the POINT RIGHT/LEFT button(s) to adjust the value.

Press the SELECT button to set Full screen function on/off.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents LV-7325U Safety Precautions To the OwnerRisk of Electric Shock Do not Open Important Safety Instructions GroundTable of Contents Features and Design CompatibilityPower Cord Connector PreparationName of Each Part of the Projector Exhaust VentSETTING-UP the Projector Adjustable FeetPositioning the Projector Preparation Connecting the AC Power Cord VentilationProjector side Female AC outlet side Male Preparation Mounting Lens Cover Moving the ProjectorConnecting the Projector Terminals of the ProjectorConnecting to the Video Equipment Connecting the ProjectorCables used for connection Video CableConnecting to the Computer VGA Cable Control Cable for PS/2 PortMAC Adapter Monitor Cable Computer Monitor Control Audio OUT Port MAC Adapter Not suppliedOperation of the Remote Control Before OperationLaser Pointer Function Remote Control Battery Installation Operating RangeTOP Controls and Indicators HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Before Operation Menu BAR View Menu Basic Operations Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorAdjusting the Image Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Computer Mode Selecting Computer ModeSelecting Computer System PC Adjustment AdjustTotal lines Total dotsHorizontal / Vertical ClampComputer Mode Compatible Computer Specifications ResolutionFreq KHzAdjust Picture Image Manually Normal FunctionPicture Position Adjustment Computer Mode Auto Image FunctionPosition Picture Screen Adjustment Expand functionCompress function Panning functionVideo Mode Selecting Video ModeSelecting Color System AutoAdjusting the Picture Image Quit Closes the Picture Image Adjustment MenuColor TintMCI Mode HOW to Load the Memory Card Into the ProjectorOperating the PC Card Slot LoadSelecting MCI Mode MCI Mode Available DataAvailable Card Show the Data in the Memory Card Index SelectionSelection Access to the Memory Card Through the Projector Write Data Into the Memory CardPicture Image Adjustment Adjust the Picture Image ManuallyImage Picture Screen Adjustment CF Card and Pcmcia Adapter Inserting / Removing the CF CardHandling CF Card and Pcmcia Adapter Setting Setting MenuSelecting Language Operating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance Temperature Warning IndicatorAIR Filter Care and Cleaning Cleaning the Projection LensAppendix Lamp Replacement Indicator Lamp ReplacementLamp Replacement Monitor Timer Troubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Optional Parts Canon U.S.A., INC. NEW York Office
Top Page Image Contents