PREPARATION
CONNECTING THE AC POWER CORD
This projector uses nominal input voltages of
Consult your authorized dealer or service station if your are not sure of the type of power supply in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to pages 10 ~ 13 for connection.)
CAUTION
For safety, unplug the AC Power Cord when the appliance is not in use.
When this projector is connected to the outlet with the AC Power Cord, the appliance is in
Connect the AC power supply cord (supplied) to the projector.
The
Projector side (Female) |
| AC outlet side (Male) |
|
|
|
VENTILATION
This projector is equipped with cooling fans for protection from overheating. ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover the vent slot.
●Keep the rear grill at least 3 feet (1m) away from any object.
●Keep sides clear of any obstructions. Obstructions
may block cooling air.
Pay attention to the following to
EXHAUST VENT
(REAR SIDE)
AIR INTAKE VENTS (BOTH SIDES)
8