VIDEO MODE
| PICTURE IMAGE ADJUSTMENT |
| ADJUSTING THE PICTURE IMAGE |
1 | Press the MENU button and the |
| appear. Press the POINT LEFT/RIGHT buttons to select |
| IMAGE and press the SELECT button. Another dialog box |
| PICTURE IMAGE ADJUSTMENT Menu will appear. |
2 | Press the POINT DOWN button and a |
appear. Move the arrow to the item that you want to adjust by |
pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.
Color
Press POINT LEFT button to lighten the image, and press POINT
RIGHT button to deepen the image. (From 0 to 63.)
Tint
Press POINT LEFT button to increase purple, and press POINT
RIGHT button to increase green. (From 0 to 63.)
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)
Contrast
Press POINT LEFT button to decrease contrast, and press POINT
RIGHT button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to darken the image, and press POINT
RIGHT button to brighten the image. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften the image, and press POINT
RIGHT button to sharpen the image. (From 0 to 63.)
Each of the keys operates as follow.
Reset | Recalls the data previously adjusted. |
Stored 
Stores the data in the memory.
Quit | Closes the PICTURE IMAGE ADJUSTMENT Menu. |
NORMAL FUNCTION
The normal picture level is preset on this projector at the factory and
can be restored anytime you press the NORMAL button (located on Normal the Top Control or on the Remote Control Unit). The "Normal"
display will be displayed on the screen for a few seconds.
It indicates the level of the item.
Move the arrow to the item and press
POINT RIGHT / LEFT button.
Close the PICTURE
IMAGE ADJUSTMENT
Menu.
31