1. Introduction
❹Part Names of the Remote Control
| 1 |
POWER | INFO. |
2 | 3 |
IMAGE | INPUT AUTO PC |
4 | 6 |
ASPECT | NO SHOW |
7 | 8 |
9 | MENU | 5 |
| ||
| 10 | |
|
|
11
12
BACK
13
14
15 |
|
| VOL |
|
| 17 | |||
|
| PAGE D.ZOOM | |||||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16 | FREEZE | 18 |
| ||
|
| |
|
|
1.Infrared Transmitter
Direct the remote control toward the remote sensor on the projector cabinet.
2.POWER Button
When the main power is on, you can use this button to turn your projector on.
NOTE: To turn on the projector, press and hold the POWER button for about 1 second.
You can use this button to turn your projector off. NOTE: To turn off the projector, press this button twice.
3.INFO. Button
Provides the information on the current signal and projector settings. See page 53.
4.IMAGE Button
Press this button to display the Image adjustment menu to adjust Image mode, Contrast, Brightness, Sharpness, Color level and Color balance. See pages 44 to 45.
5.INPUT Button
Selecting from INPUT List
Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change as follows:
Computer 1* → Computer 2 (Digital)* → Computer 2 (Analog)* → VIDEO →
To display the selected source, press the OK button or allow 2 seconds to elapse.
Detecting the Signal Automatically
Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the input source will change as follows:
Computer 1* → Computer 2 (Digital)* → Computer 2 (Analog)* → VIDEO →
*
6.AUTO PC Button
Use this button to adjust an analog RGB source for an optimal picture. See page 30.
7.ASPECT Button
Press this button once to display the Aspect select menu. Keep pressing will change aspect ratios. See page 45.
8.NO SHOW Button
This button turns off the image and sound for a short period of time. Press again to restore the im- age and sound. See page 33.
9.MENU Button
Displays the menu for various settings and adjust- ments. See page 39, 40.
10.SELECT 
(Mouse) Button See page 39.
: Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a selected menu item. A press of the 
button executes the selection.
When an image is magnifi ed, the SELECT 
button moves the image. See page 33.
This button also works as a computer mouse when the supplied remote mouse receiver is connected with your computer. See page 35. (This button can- not be used as a computer mouse for
11. OK Button
8