
3. Projecting an Image (Basic Operation)
❷Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the pro- jector.
Selecting from INPUT List
Press and quickly release the INPUT button on the projector cabinet
WER
POWER INFO.
IMAGE INPUT AUTO PC
INPUT
ASPECT | NO SHOW |
to display the Source list. Each time the INPUT button is pressed, the input source will change as follows: “Computer 1”, “Computer 2 (Digi- tal/Analog)
AUTO PC
VOL
-
MENU
BACK
Detecting the Signal Automatically
Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the in- put source will change as follows:
Computer 1 → Computer 2 (Digital) → Computer 2 (Analog) → Video
→
Computer → Video →
TIP: If no input signal is present, the input will be skipped.
TIP: The COMPUTER 2 button on the remote control toggles the Computer 2 source between [Computer 2 (Digital)] and [Computer 2 (Analog)].
Selecting Default Source
You can set a source as the default source so that it will be displayed each time the projector is turned on.
1.Select [Setup] → [Options] → [Default source select] from the menu.
The [Default source select] screen will be dis- played.
2.Select a source as the default source, and press the OK button.
3.Press the BACK button a few times to close the menu.
4.Restart the projector.
The source you selected in step 2 will be pro- jected.
(→ page 51)
25