Canon LV-7260, LV-7265, LV-X7 user manual Audio Analog

2. Installation and Connections

Connecting Your PC or Macintosh Computer (LV-7260/LV-X7)

NOTE: The ANALOG IN connector supports Plug & Play (DDC2).

AUDIO IN	ANALOG IN
	ANALOG
S-VIDEO	L
IN
	SERVICE PORT
VIDEO	R
IN
	AUDIO IN

Audio cable (not supplied)

PHONE

NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port.

IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)

VGA cable (supplied)

To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one.

PHONE

IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type)

NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter.

This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.

•When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fi ll the screen and then press the AUTO PC button on the remote control or the projector cabinet.

18