Canon LV-7260, LV-7265, LV-X7 ❺ Automatically Optimizing on RGB Image, ❻ Turning Up or Down Volume

3. Projecting an Image (Basic Operation)

❺Automatically Optimizing on RGB Image

Adjusting the Image Using Auto PC adjustment

Optimizing an RGB image automatically.

Press the AUTO PC button to optimize an RGB image automatically.

[Poor picture]

O

WER

	POWER	INFO.
INPUT	IMAGE	INPUT AUTO PC
AUTO PC	ASPECT	NO SHOW
VOL	MENU
-

BACK

[Normal picture]

Press the AUTO PC button to fi ne-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)

This adjustment may be necessary when you connect your computer for the fi rst time.

NOTE:

Some signals may not be displayed correctly or take time.

•LV-7265: The Auto PC adjustment function does not work for component, video, and DVI digital signals.

•LV-7260/LV-X7: The Auto PC adjustment function does not work for component and video signals.

•If the Auto PC adjustment operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and Tracking manually. See page 46.

❻Turning Up or Down Volume

Sound level from the speaker can be adjusted.

MENU

Increase volume Increase volume

Decrease volume KEYSTONE

VOL	VOL
-	+	Decrease volume
		BACK

L-CLICK R-CLICK

VOL PAGE D.ZOOM

FREEZE

TIP: When no menus appear, the SELECT and buttons on the projector cabinet work as a volume control.

30