Dukane 9100HC manual Position menu, Aspect ratio menu, Decoder menu, Resize menu, Logo menu

Adjustments and Settings Using Menus

When there is no image signal inputted

Adjustment item (press / )	Adjustment content (press  / )
“Position”	Adjusts the position of the image and
	menu display.
	[ Press the [ENTER] button to enter the
	“Position” menu 4.
“Sync level”	Although the inputted image signal is
(When PC input is	adjusted so that synchronization occurs
selected)	automatically, this changes by changing
	this setup.
	Setting can be made by selecting “Low”
	(weaker), “Std” (factory set) or “High”
	(stronger).
	Values : “Low”, “Std”, “High”	{“Std”}

4“Position” menu

You can adjust the menu display position. Press the (
/ ) cursors to set the horizontal/vertical position of the menu display.

Set Value	:
“Menu pos.”	:	¥ ¥ ¥	¥ ¥	¥	¥	¥
		{
								}
“Horiz. disp. pos.”	: Varies with signals.
“Vert. disp. pos.”	: Varies with signals.
“Horiz. DIST pos.”	: -8 ~ +7						{0}

5“Aspect ratio” menu

Press the cursor ( / ) to set the aspect ratio of image. (☞ page 41, 42)

Setting value : “4:3”, “16:9”, “Zoom” * {varies with signals}

*When creating a 16:9 image with black bars above and below the screen from the signal with original aspect ratio of 4:3, the image will be enlarged to full screen on the panel if “Aspect ratio” is set to “Zoom”.

6“Decoder” menu

Press the (
/ ) cursor buttons to choose the “Decoder” of the image signals. Normally, “AUTO” is selected. When “AUTO” does not function or when there is error, select the appropriate color system according to the software player.

Values	: “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “SECAM”
	{“AUTO”}

7“Resize” menu

Press the cursor ( / ) to resize. (☞ page 43, 44)

Setting value	: “1:1”, “Panel”, “Aspect”, “Zoom”
	{varies with signals}
“1:1”	: The image is displayed at the inputted resolution.
“Panel”	: The picture image projected is virtually enlarged
	to the full screen size if the inputted resolution is
	smaller than (1400 pixels x 788 pixels).
“Aspect”	: While maintaining the original aspect ratio, the
	video image projected is virtually enlarged until ei-
	ther the horizontal or vertical side reaches the full
	size (1400 pixels x 788 pixels).
“Zoom”	: The picture image projected is virtually enlarged
	to the full screen size if the 16:9 image is created
	with black bars above and below the screen from
	the signal with original aspect ratio of 4:3.

8“Logo” menu

Adjustment item (press
/ ) Adjustment content (press  / )

“Logo disp.”		Sets whether to indicate the user set logo
		(captured image: “Logo disp.”) when the
		projector starts up.
				{“ON”}
“Logo pos.”		Sets the position of the user set logo (cap-
		tured image: “Logo disp.”) when the pro-
		jector starts-up. Re-setting can be per-
		formed only when the logo has been
		eliminated.
Set value	:
		¥ ¥ ¥	¥ ¥	¥ ¥ ¥
“Logo pos.”	:	{			}
“Back color”		Selects the background color of the user
		set picture (captured image: “Logo disp.”).
				{“Black”}
		Re- setting can be performed only when
		the logo has been eliminated.
“Logo delete”		Deletes the user set logo (captured
		image: “Logo disp.”). Deletion takes a few
		seconds.

[Press the [ENTER] button to delete.

“Capture menu”	You can project a picture from the video
	player or PC and capture it to use as your
	logo.
	The captured picture can be displayed as
	a logo display when the projector starts
	up.
	[ Press the [ENTER] button to enter the
	“Capture menu” 9.

9“Capture menu”

Adjustment item (press
/ ) Adjustment content (press  / )

“Menu pos.”		Adjusts the display position of the cap-
		ture menu.
Set value	:
		¥ ¥ ¥	¥ ¥	¥ ¥ ¥
“Menu pos.”	:
		{
					}
“Horiz. move”		The position of the picture that you want
		to capture can be moved left or right with
		the cursor buttons ( / ).
“Vert. move”		The position of the picture that you want
		to capture can be moved up or down with
		the cursor buttons ( / ).
“Horiz. size”		The width of the picture that you want to
		capture can be set by the cursor buttons
		( / ).
“Vert. size”		The height of the picture that you want to
		capture can be set by the cursor buttons
		( / ).
“Capture start”		After setting all the items of the capture
		menu, image capture starts.

❈Note that images already inputted will be deleted.

[Press the [ENTER] button to start.

38