Dukane 9100HC manual  RS-232C external control, Communication Specifications, Command Format

Page 59

Specifications

RS-232C external control

By connecting a computer to the projector with a RS-232C cross cable (D-sub 9 pins), you can control the projector with the computer. The commands to control the projector and the response data format against the received commands are explained here.

For details, please consult the authorized dealer where you purchased your projector.

1.Communication Specifications

The communication specifications are as follows.

Baud rate

9600 bps/19200 bps

 

 

Data length

8 bits

 

 

Parity

None

 

 

Stop bit

1 bit

 

 

Flow control

None

 

 

2.Command Format

2-1 Command data format

When sending a control command to the projector, use the following data format.

Header

Header

ID

SP

CR

ID

 

SP

 

Command

[

SP

 

Parameter

[

CR

:Designates the head of data and the data type.

:! (21h): Assigns command to the projector.

:? (3Fh): Query to the projector. (Asking command)

:1: The identification number of the projector. (Manufacturer set value 1)

:Designates the delimiter for ID, Command, and Parameter. (20h)

:Designates the terminal of the data. (0Dh)

* [ ] is not necessary for Asking command.

2-2 Response data format

Upon executing a control command it has received, the projector sends back the following response data to the computer:

Header ID SP

Header

ID

SP

Normal Termination Status

CR

Normal Termination Status

[

SP

 

Parameter

[

CR

:Designates the head of data.

:@ (40h): Fetches data from the projector.

:1: The identification number of the projector. (Manufacturer set value 1)

:Designates the delimiter for ID, Command, and Parameter. (20h)

:0 (30h)

:Designates the terminal of the data. (0Dh)

2-3 Parameters used for the data format

The following three kinds of parameters are used for control commands and response data.

1)Numeric value

2)ON/OFF

3)Special parameters

Each parameter is as follows:

1)Numeric value

A 2-byte hexadecimal value (sign included) is represented by a set of 4 digit (4 bytes) characters. Designated range: 8000 to 7FFF.

2)ON/OFF

Shows the status (ON/OFF) of the projector, such as POWER and HIDE.

Character

Hex.

Meaning

 

 

 

0

30

OFF

 

 

 

1

31

ON

 

 

 

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Model 9100HC Machine Noise Information Germany only FCC Information U.S.A. onlyFor United For European Kingdom Safety PrecautionDo not allow any unqualified person to install the unit Power supply voltage AC 120Do not cut off the main plug from this equipment How To Replace The FuseAbout burning-in of the D-ILA device Using the projectorHow to use the Screen Trigger terminal cable Using the screen mode switch functionAccessories ContentsFront Side/ Top Surface/ Left Side Controls and FeaturesRear Side/ Right Side/ Bottom Surface Controls and FeaturesConnector Panel Control Panel on the Projector Indicator Display on the Control PanelTemp Indicator Stand by IndicatorOperate Indicator Lamp IndicatorFocus button Not functional on this unit Remote Control UnitVolume button Video button PC buttonDigital Zoom ª / · buttons Remote Control’s signal transmitter Operate buttonVolume ª / · button Screen „ / Í buttonLoad the batteries Loading Batteries into the Remote ControlPrecautions for using batteries Open the back coverPrecautions for Installation Installing the ProjectorMounting the Projector Installing the Projector against the ScreenInstalling the Projector Precaution for ceiling-mount43 Screen Screen installationProjection Distance and Screen Size When the remote control unit fails to work properly Effective Range and Distance of the Remote Control Unit Using as a wireless remote control unit  Using as a wired Remote Control Computer signals Connecting to Various DevicesSignals that can be input into the projector  Video signals Allowable input signals Connecting to Various DevicesConnection Connecting to Devices Connecting to Video Devices Right side of projector Connecting to Computers Connection for controlling more than one projector  Control from external device When using the projector, remove the Lens Cap Connecting the Power Cord suppliedBasic Operations Basic Operation ProceduresPower On Insert the power cord into the wall outletBasic Operations  Display using the direct buttonsAdjusting the Zoom Ring the screen size Adjusting the Focus Ring FocusPlug out the power cord from wall outlet Adjusting the Sound VolumePower Off Press Volume · 50Enlarging the Image Frequently used Convenient FunctionsDisplaying a Still Picture Turning Off Image and Sound Horiz.Keystone Display Removing the Trapezoidal Distortion of the Image Vert.keystone Display Quick Alignment function Using the Quick Alignment functionPress the Quick ALIGN. Quick Alignment button Submenu Adjustments and Settings Using MenusMenu Structure Main menuMain menu Submenu Adjustments and Settings Using MenusMain Set up menu When PC input is selected Main Set up menu When video input is selectedButton Menu Operation ButtonsMenu Procedure for Menu Operation Image adj. menu Adjustment and Setting Using MenusMenu Configuration Set up menuResize menu Position menuAspect ratio menu Decoder menuLanguage menu Capture startOptions menu Color profile menuInformation menu Project the image onto the screen Setting Aspect ratio and ResizeSetting the Aspect ratio Optimum image Setting Aspect ratio and ResizePress the Menu button to end when adjustment is com- pleted Select Zoom with the cursor buttons  / Resize menu appears on the screen Setting the ResizeSet the Resize when Hdcp image is input from PC3 terminal Select Resize with the cursor buttons  /  and press EnterSet Resize to Zoom for optimum projected image Press the Enter or the right cursor button  Editing and Projecting LogoProject the images to be included in your logo Select Logo with the cursor buttons  / Editing and projecting logo Light source lamp and its lamp time Procedure for lamp replacementAbout lamp replacement Replacing the LampClose the handle, and tighten the screw Replacing the LampRemove the lamp unit Insert the new lamp unit until it is fullyPress for Resetting the lamp timeInsert the power cord into the wall outlet To ensure the lamp time has been resetReinstalling the filter Cleaning and Replacing the FilterPull out the power cord from the wall outlet Clean the filterPlied TroubleshootingSymptom Probable cause Corrective action TroubleshootingMessage Cause Contents What to do when these messages are displayedWhat to do when these messages are displayed  Action to be taken upon warning indications  About warning indicatorsFor details on individually blinking indicators, please see Please follow the procedures belowPB, PR Specifications Bottom SpecificationsDimensions unit mm  Top  Front PC 3 terminal Pin number Signal namePin arrangement  Y/C terminal  RS-232C IN/OUT terminal  PC 1 terminal RS-232C external control Communication SpecificationsCommand Format External control command table Dukane Corporation Audio Visual Products

9100HC specifications

The Dukane 9100HC is a cutting-edge ultrasonic welding system designed for high-performance applications in the healthcare and industrial sectors. Built to facilitate reliable and precise joining of thermoplastic materials, this advanced machine integrates several innovative technologies to ensure optimal performance and efficiency.

One of the standout features of the Dukane 9100HC is its enhanced ultrasonic technology. This system utilizes high-frequency ultrasonic waves, which generate localized heat at the interface of the materials being welded. This technology allows for faster welding cycles and minimizes the risk of damaging heat-sensitive components, making it ideal for applications that require delicate handling.

The 9100HC system is equipped with a user-friendly touchscreen interface, providing operators with easy access to important functionalities. This interface includes real-time process monitoring, allowing users to track key parameters such as temperature and amplitude during the welding process. Additionally, the system supports built-in data logging, enabling detailed analysis and quality assurance for critical applications.

Another significant characteristic of the Dukane 9100HC is its advanced energy management system. This system optimizes the energy used during the welding process, enhancing the overall efficiency and reducing operational costs. Moreover, the Dukane 9100HC is designed to accommodate a wide range of welding applications, thanks to its versatile tooling options. This adaptability makes it suitable for both small-scale operations and large manufacturing runs.

The machine's robust construction ensures durability and longevity, even in demanding environments. The compact design facilitates easy integration into existing production lines, while the ability to customize and configure the system according to specific production needs makes it a preferred choice among manufacturers.

Safety is paramount in Dukane’s design philosophy, and the 9100HC is no exception. It incorporates multiple safety features, including emergency stop buttons and protective enclosures, ensuring operator safety and compliance with industry standards.

Overall, the Dukane 9100HC represents a significant advancement in ultrasonic welding technology, delivering reliability, efficiency, and versatility to a wide array of applications within the healthcare and industrial sectors. With its innovative features and user-centric design, the Dukane 9100HC stands out as a premier solution for manufacturers seeking high-quality welding solutions.
Top Page Image Contents