Dukane 9100HC manual Remote Control’s signal transmitter Operate button, Screen „ / Í button

Page 13

Controls and Features

1Remote Control’s signal transmitter

(☞ page 18)

2[OPERATE] button

When the projector is in standby mode, pressing this but- ton for one second or more will turn on the projector and light up the [OPERATE] indicator. Press it one second or more again and the projector will turn off, cool down and finally enter the standby mode. (☞ page 25)

•The [OPERATE] button will not work for approximately 1 minute from when the light-source lamp is turned on. Wait approximately 1 minute before pressing.

3[SCREEN] „ / Í button

Not functional on this unit.

4[DIGITAL ZOOM] ª / · buttons

This digital zoom function can magnify the image by up to four times on the screen. (☞ page 28)

•There will however be some inevitable loss of image qual- ity when images are enlarged.

5[FREEZE] button

This button allows the image to be retained in the projector memory and stills the picture on the screen. Press the but- ton once to freeze the picture and again to de-freeze. (☞ page 29)

6[QUICK ALIGN.] (quick alignment) button

Use this button to automatically adjust the projected im- age’s (i)horizontal and vertical position, (ii) Width and dis- play area, etc. During alignment, the message “QUICK ALIGN...” appears on the screen and disappears when align- ment is complete. (☞ page 31)

•The Quick Alignment function only works when the sig- nal is input from either the [PC1] or [PC2] terminal. It does not work when the signal is input from the [VIDEO] input terminal or the [Y/C] input terminal.

•When input signal from [PC3] input terminal is received, “QUICK ALIGN...” is displayed but it is not functional.

7[EXIT] button

Press this button to display the previous hierarchical menu (For example, from sub-menu to main menu). When the main menu is displayed, pressing this button will cause the menu to disappear. (☞ page 35)

8[ENTER] button

Press this button to show the next hierarchical menu (For example, from main menu to sub menu). It is also used when [ENTER] is displayed against the item on the menu screen or to select the “Reset” menu. (☞ page 35)

9[HIDE] button

Use this button to temporarily halt the audio and visual out- put. Press again to resume.

(☞ page 29)

pCursor ( /  /  / ) button

These buttons are used in the menu mode to select an item, adjust the value etc. (☞ page 35)

q[VIDEO] button

Use this button to select a device such as a video con- nected to the [VIDEO IN] terminal ([VIDEO] or [Y/C] Input terminal) of the projector. (☞ page 25)

w[PC] button

Use this button to select a device connected to the [PC1], [PC2] or [PC3] terminal of the projector. (☞ page 26)

e[H-KEYSTONE] button

Use this button to remove the horizontal trapezoidal distor- tion of the image projected on the screen. (☞ page 30)

r[V-KEYSTONE] button

Use this button to remove the vertical trapezoidal distortion of the image projected on the screen. (☞ page 30)

t[VOLUME] ª / · button

Use these buttons to adjust the sound volume. (☞ page 27)

y[FOCUS] ª / · button

Not functional on this unit.

u[MENU] button

Use this button to enter or exit the menu mode. When the main menu is displayed, press this button and it will disap- pear. (☞ page 35)

i[PRESET] button

This [PRESET] button only works as a reset button for the [VOL.], [V-KEYSTONE] and [H-KEYSTONE] adjustments done on the control panel and the [VOLUME], [V-KEY- STONE], [H-KEYSTONE] and [DIGITAL ZOOM] adjust- ments done on the remote control. (☞ page 28, 30)

When adjusting the volume, keystone or digital zoom (when the setting is displayed on the screen) the adjusted value is reset to that which was set when the projector was shipped from the factory. This button does not work for the menu (submenu) items.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model 9100HC Machine Noise Information Germany only FCC Information U.S.A. onlyDo not allow any unqualified person to install the unit Safety PrecautionPower supply voltage AC 120 For United For European KingdomDo not cut off the main plug from this equipment How To Replace The FuseHow to use the Screen Trigger terminal cable Using the projectorUsing the screen mode switch function About burning-in of the D-ILA deviceAccessories ContentsFront Side/ Top Surface/ Left Side Controls and FeaturesRear Side/ Right Side/ Bottom Surface Controls and FeaturesConnector Panel Control Panel on the Projector Indicator Display on the Control PanelOperate Indicator Stand by IndicatorLamp Indicator Temp IndicatorVolume button Remote Control UnitVideo button PC button Focus button Not functional on this unitVolume ª / · button Remote Control’s signal transmitter Operate buttonScreen „ / Í button Digital Zoom ª / · buttonsPrecautions for using batteries Loading Batteries into the Remote ControlOpen the back cover Load the batteriesPrecautions for Installation Installing the ProjectorInstalling the Projector Installing the Projector against the ScreenPrecaution for ceiling-mount Mounting the ProjectorProjection Distance and Screen Size Screen installation43 Screen  Using as a wireless remote control unit Effective Range and Distance of the Remote Control Unit Using as a wired Remote Control When the remote control unit fails to work properlySignals that can be input into the projector Connecting to Various Devices Video signals  Computer signals Allowable input signals Connecting to Various Devices Connecting to Video Devices Connecting to DevicesRight side of projector Connection Connecting to Computers Connection for controlling more than one projector  Control from external device When using the projector, remove the Lens Cap Connecting the Power Cord suppliedPower On Basic Operation ProceduresInsert the power cord into the wall outlet Basic OperationsAdjusting the Zoom Ring the screen size  Display using the direct buttonsAdjusting the Focus Ring Focus Basic OperationsPower Off Adjusting the Sound VolumePress Volume · 50 Plug out the power cord from wall outletEnlarging the Image Frequently used Convenient FunctionsDisplaying a Still Picture Turning Off Image and Sound Vert.keystone Display Removing the Trapezoidal Distortion of the Image Horiz.Keystone Display Press the Quick ALIGN. Quick Alignment button Using the Quick Alignment functionQuick Alignment function Menu Structure Adjustments and Settings Using MenusMain menu SubmenuMain menu Submenu Adjustments and Settings Using MenusMain Set up menu When PC input is selected Main Set up menu When video input is selectedMenu Menu Operation ButtonsButton Procedure for Menu Operation Menu Configuration Adjustment and Setting Using MenusSet up menu Image adj. menuAspect ratio menu Position menuDecoder menu Resize menuOptions menu Capture startColor profile menu Language menuInformation menu Setting the Aspect ratio Setting Aspect ratio and ResizeProject the image onto the screen Press the Menu button to end when adjustment is com- pleted Setting Aspect ratio and ResizeSelect Zoom with the cursor buttons  /  Optimum imageSet the Resize when Hdcp image is input from PC3 terminal Setting the ResizeSelect Resize with the cursor buttons  /  and press Enter Resize menu appears on the screenSet Resize to Zoom for optimum projected image Project the images to be included in your logo Editing and Projecting LogoSelect Logo with the cursor buttons  /  Press the Enter or the right cursor button Editing and projecting logo About lamp replacement Procedure for lamp replacementReplacing the Lamp Light source lamp and its lamp timeRemove the lamp unit Replacing the LampInsert the new lamp unit until it is fully Close the handle, and tighten the screwInsert the power cord into the wall outlet Resetting the lamp timeTo ensure the lamp time has been reset Press forPull out the power cord from the wall outlet Cleaning and Replacing the FilterClean the filter Reinstalling the filterPlied TroubleshootingSymptom Probable cause Corrective action TroubleshootingMessage Cause Contents What to do when these messages are displayedWhat to do when these messages are displayed For details on individually blinking indicators, please see  About warning indicatorsPlease follow the procedures below  Action to be taken upon warning indicationsPB, PR SpecificationsDimensions unit mm  Top Specifications Front  BottomPin arrangement  Y/C terminal  RS-232C IN/OUT terminal Pin number Signal name PC 1 terminal  PC 3 terminalCommand Format Communication Specifications RS-232C external control External control command table Dukane Corporation Audio Visual Products

9100HC specifications

The Dukane 9100HC is a cutting-edge ultrasonic welding system designed for high-performance applications in the healthcare and industrial sectors. Built to facilitate reliable and precise joining of thermoplastic materials, this advanced machine integrates several innovative technologies to ensure optimal performance and efficiency.

One of the standout features of the Dukane 9100HC is its enhanced ultrasonic technology. This system utilizes high-frequency ultrasonic waves, which generate localized heat at the interface of the materials being welded. This technology allows for faster welding cycles and minimizes the risk of damaging heat-sensitive components, making it ideal for applications that require delicate handling.

The 9100HC system is equipped with a user-friendly touchscreen interface, providing operators with easy access to important functionalities. This interface includes real-time process monitoring, allowing users to track key parameters such as temperature and amplitude during the welding process. Additionally, the system supports built-in data logging, enabling detailed analysis and quality assurance for critical applications.

Another significant characteristic of the Dukane 9100HC is its advanced energy management system. This system optimizes the energy used during the welding process, enhancing the overall efficiency and reducing operational costs. Moreover, the Dukane 9100HC is designed to accommodate a wide range of welding applications, thanks to its versatile tooling options. This adaptability makes it suitable for both small-scale operations and large manufacturing runs.

The machine's robust construction ensures durability and longevity, even in demanding environments. The compact design facilitates easy integration into existing production lines, while the ability to customize and configure the system according to specific production needs makes it a preferred choice among manufacturers.

Safety is paramount in Dukane’s design philosophy, and the 9100HC is no exception. It incorporates multiple safety features, including emergency stop buttons and protective enclosures, ensuring operator safety and compliance with industry standards.

Overall, the Dukane 9100HC represents a significant advancement in ultrasonic welding technology, delivering reliability, efficiency, and versatility to a wide array of applications within the healthcare and industrial sectors. With its innovative features and user-centric design, the Dukane 9100HC stands out as a premier solution for manufacturers seeking high-quality welding solutions.
Top Page Image Contents