Dukane 8920H-RJ, 8919H-RJ, 8755J-RJ user manual Standby Mode, Monitor OUT

SETUP menu

Item

Description

	Using the ▲/▼ buttons switches the mode for mirror status.
MIRROR	NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT
	If the Transition Detector is on and MIRROR status is changed,
	TRANSITION DETECTOR ON alarm (59) will be displayed when
	projector is restarted after the AC power is turned off.
	Using ▲/▼ buttons switches the standby mode setting between
	NORMAL and SAVING.
	NORMAL ó SAVING
	When SAVING is selected, the power consumption in the standby
	mode is lowered with some functional restriction as below:
STANDBY MODE	• When SAVING is selected, the RS-232C communication control
	except to turn the projector on and the network function are disabled
	while the projector is in the standby mode. If the COMMUNICATION
	TYPE in the COMMUNICATION menu is set to NETWORK
	BRIDGE, all of the RS-232C commands are disabled (48).

•When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO SOURCE (37) is invalid, and no signal is output from AUDIO OUT port in the standby mode.

The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu.

The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen.

(1) Choose a picture input port using ▲/▼ buttons.

	COMPUTER IN1 ó COMPUTER IN2
	
	STANDBY	COMPONENT
	
	VIDEO ó S-VIDEO ó (Y, Cb/Pb, Cr/Pr)
	• Choose STANDBY, to select the output
	signal from the MONITOR OUT port in the standby mode.
MONITOR OUT	STANDBY settings can be selected individually for NORMAL or
	SAVING, which is selected in the STANDBY MODE (above).

(2)Select one of the COMPUTER IN ports using ◄/► buttons. Choosing the COMPUTER IN1 allows the following choice.

COMPUTER IN1 ó OFF

Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2 ó OFF

Choosing other input or STANDBY allows the following choice. COMPUTER IN1 ó COMPUTER IN2 ó OFF

•OFF disables the MONITOR OUT port.

•Initial settings for STANDBY are the following: COMPUTER IN1 when NORMAL is selected in STANDBY MODE; and OFF when SAVING is selected in STANDBY MODE.

36