Dukane 8919H-RJ IP Address, Subnet, Mask, Default, Setup Gateway, DNS Server, Time, Difference

Page 52

NETWORK menu

Item

Description

 

 

Use the ▲/▼/◄/► buttons to enter the IP

 

 

ADDRESS.

 

 

This function can only be used when DHCP is set

 

IP ADDRESS

to OFF.

 

• The IP ADDRESS is the number that identifies

 

 

this projector on the network. You cannot have two

 

 

devices with the same IP ADDRESS on the same

 

 

network.

 

 

• The IP ADDRESS “0.0.0.0” is prohibited.

 

 

Use the ▲/▼/◄/► buttons to enter the same

 

SUBNET

SUBNET MASK used by your computer.

 

This function can only be used when DHCP is set

 

MASK

to OFF.

 

 

 

 

• The SUBNET MASK ”0.0.0.0” is prohibited.

 

 

Use the ▲/▼/◄/► buttons to enter the DEFAULT

 

DEFAULT

GATEWAY (a node on a computer network that

 

serves as an access point to another network)

SETUP

GATEWAY

address.

 

This function can only be used when DHCP is set

(continued)

 

to OFF.

 

 

 

 

Use the ▲/▼/◄/► buttons to input the DNS

 

DNS SERVER

server address.

 

The DNS server is a system to control domain

 

 

names and IP addresses on the Network.

 

 

Use the ▲/▼ buttons to enter the TIME

 

 

DIFFERENCE.

 

TIME

Set the same TIME DIFFERENCE as the one

 

set on your computer. If unsure, consult your IT

 

DIFFERENCE

 

manager.

 

 

Use the ► button to return to the menu after

 

 

setting the TIME DIFFERENCE.

 

 

Use the ▲/▼/◄/► buttons to enter the Year (last

 

DATE AND

two digits), Month, Date, Hour and Minute.

 

• The projector will override this setting and retrieve

 

TIME

DATE AND TIME information from the Time server

 

 

when SNTP is enabled. (Date/Time Settings

 

 

of the User’s Manual - Network Guide)

(continued on next page)

 

52

Image 52
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Control panel Rear panel &9Remote control Down button &14 Volume + button &16Computer button &17 STANDBY/ON button &15Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices MonitorComputer VCR/DVD playerConnecting your devices External deviceAbout Plug-and-Play capability Connecting power supply Using the security bar and slotInstalling the batteries Remote controlAbout the remote control signal Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer buttonVideo button MY SourceSearching an input signal  For a computer signal For a video signal, s-video signal or component video Signal 43  169   For no signalAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionUsing the magnify feature Correcting the keystone distortionsKeystone button MagnifyTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuIndication in OSD On Screen Display Position buttonIndication Meaning Picture Mode AspectAuto Keystone ExecuteECO Mode ResetMirror Filter TimePicture menu BrightnessContrast GammaHigh  1 Custom  2 MID  CustomColor TintActive Iris SAVE-1, SAVE-2, SAVE-3, SAVE-4For a computer signal For no signalImage menu Over ScanPhase For a video signal and s-video signalAuto Adjust For a component video signalInput menu ProgressiveVideo NR Color SpaceComputer Video FormatFrame Lock Resolution Setup menu Standby Mode Monitor OUTVolume Audio menuSpeaker Audio SourceBlank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished MyScreen Lock MessageSource Name TemplateDescription Closed Caption DisplayMode ChannelOption menu Auto SearchAuto Direct onAuto OFF Lamp TimeInputinformation  50, Networkinformation MY ButtonService FAN SpeedGhost Filter MessageRemote Freq KEY LockControl port Serial Settings Communication TypeBaud Rate ParityBytes Interval Timeout Response Limit TimeInformation Factory ResetIt shows the information about the current input Network menu SetupDhcp Default Setup GatewayIP Address SubnetProjector NameMY Image AMX D.DInformation Password Security menuEnter the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password MY Text WritingMaintenance Replacing the lampType number 456-8755H Replacing the lampHigh Voltage High Temperature Lamp warningCleaning and replacing the air filter Type number MU06481 Filter setCleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032HCaring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings PowerIndicator indicator Description Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Mute function is workingECO Mode function is working Not properly adjustedLamp is approaching the end of its product Lifetime Lens is dirty or mistySpecification SpecificationsSpecification Specifications