Dukane 8920H-RJ, 8919H-RJ, 8755J-RJ user manual Video Format, Computer, Frame Lock

INPUT menu

Item	Description
	The video format for S-VIDEOport and VIDEO port can be set.
	(1) Use the ▲/▼ buttons to
	select the input port.
	S-VIDEO ó VIDEO
	(2) Using the ◄/► buttons
	switches the mode for video
VIDEO FORMAT	format.
	AUTO ó NTSC ó PAL ó SECAM
	N-PAL ó M-PAL ó NTSC4.43
	• This item is performed only for a video signal from the VIDEO port
	or the S-VIDEOport.
	• The AUTO mode automatically selects the optimum mode.
	• The AUTO operation may not work well for some signals. If the
	picture becomes unstable (e.g. an irregular picture, lack of color),
	please select the mode according to the input signal.
	The computer input signal type for COMPUTER IN1 and IN2 ports
	can be set.
	(1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
	COMPUTER IN1 ó COMPUTER IN2
	(2) Use the ◄/► buttons to select
	the computer input signal type.
COMPUTER IN	AUTO ó SYNC ON G OFF
	• Selecting the AUTO mode allows
	you to input a sync on G signal or component video signal from the
	port.
	• In the AUTO mode, the picture may be distorted with certain
	input signals. In such a case, remove the signal connector so that
	no signal is received and select the SYNC ON G OFF, and then
	reconnect the signal.
	Set the frame lock function on/off for each port.
	(1) Use the ▲/▼ buttons to select
	the input ports.
	COMPUTER IN1 ó COMPUTER IN2
	(2) Use the ◄/► buttons to turn the
FRAME LOCK	frame lock function on/off .
	ON ó OFF
	• This item can be performed only on a signal with a vertical
	frequency of 49 to 51Hz, 59 to 61 Hz.
	• When ON is selected, moving pictures are displayed more
	smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select OFF.

(continued on next page)

33