Dukane 8920H-RJ Communication Type, Serial Settings, Baud Rate, Parity, Transmission Method

Page 48

OPTION menu

Item

 

Description

 

 

 

 

 

COMMUNICATION TYPE

 

 

Select the communication type for transmission via

 

 

the CONTROL port.

 

 

NETWORK BRIDGE ó OFF

 

 

NETWORK BRIDGE: Select this type, if it is

 

 

required to control an external device as a network

 

 

terminal, via this projector from the computer.

 

 

The CONTROL port doesn't accept RS-232C

 

 

commands.(Controlling the external device

 

 

via the projector (using the NETWORK BRIDGE

 

 

function) of the User’s Manual - Network Guide)

 

 

OFF: Select this mode to receive RS-232C

 

 

commands using the CONTROL port.

 

 

• OFF is selected as the default setting.

 

 

• When you select the NETWORK BRIDGE, check

 

 

the item, TRANSMISSTION METHOD (below).

 

 

SERIAL SETTINGS

 

 

Select the serial communication condition for the

 

 

CONTROL port.

 

 

BAUD RATE

SERVICE

COMMUNICATION

4800bps ó 9600bps ó 19200bps ó 38400bps

 

(continued)

(continued)

PARITY

 

 

 

 

NONE ó ODD ó EVEN

 

 

• The BAUD RATE is fixed to 19200bps and PARITY

 

 

is fixed NONE when the COMMUNICATION TYPE

 

 

is set to OFF (above).

 

 

TRANSMISSION METHOD

 

 

Select the transmission method for communication by

 

 

the NETWORK BRIDGE from the CONTROL port.

 

 

HALF-DUPLEX ó FULL-DUPLEX

 

 

HALF-DUPLEX: This method lets the projector

 

 

make two way communication, but only one

 

 

direction, either transmitting or receiving data, is

 

 

allowed at a time.

 

 

FULL-DUPLEX: This method lets the projector

 

 

make two way communication, transmitting and

 

 

receiving data at the same time.

 

 

HALF-DUPLEX is selected as the default setting.

 

 

• When you select HALF-DUPLEX, check the items,

 

 

RESPONSE LIMIT TIME and BYTES INTERVAL

 

 

TIMEOUT (49).

(continued on next page)

48

Image 48
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Checking the contents of package Part names ProjectorHOT Control panel Rear panel &9Remote control Down button &14 Volume + button &16Computer button &17 STANDBY/ON button &15Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices MonitorComputer VCR/DVD playerConnecting your devices External deviceAbout Plug-and-Play capability Connecting power supply Using the security bar and slotRemote control Installing the batteriesAbout the remote control signal Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer buttonVideo button MY SourceSearching an input signal  For a computer signal For a video signal, s-video signal or component video Signal 43  169   For no signalAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionUsing the magnify feature Correcting the keystone distortionsKeystone button MagnifyTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Advanced MenuPosition button Indication in OSD On Screen DisplayIndication Meaning Picture Mode AspectAuto Keystone ExecuteECO Mode ResetMirror Filter TimePicture menu BrightnessContrast GammaHigh  1 Custom  2 MID  CustomColor TintActive Iris SAVE-1, SAVE-2, SAVE-3, SAVE-4For a computer signal For no signalImage menu Over ScanPhase For a video signal and s-video signalAuto Adjust For a component video signalInput menu ProgressiveVideo NR Color SpaceVideo Format ComputerFrame Lock Resolution Setup menu Standby Mode Monitor OUTVolume Audio menuSpeaker Audio SourceScreen menu BlankStart UP Capturing error has occurred. Please try again Description MyScreenMyScreen registration is finished MyScreen Lock MessageSource Name TemplateDescription Closed Caption DisplayMode ChannelOption menu Auto SearchAuto Direct onAuto OFF Lamp TimeInputinformation  50, Networkinformation MY ButtonService FAN SpeedGhost Filter MessageKEY Lock Remote FreqControl port Serial Settings Communication TypeBaud Rate ParityBytes Interval Timeout Response Limit TimeFactory Reset InformationIt shows the information about the current input Setup Network menuDhcp Default Setup GatewayIP Address SubnetProjector NameMY Image AMX D.DInformation Password Security menuEnter the Security menu SecurityTurning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text WritingMaintenance Replacing the lampType number 456-8755H Replacing the lampHigh Voltage High Temperature Lamp warningCleaning and replacing the air filter Type number MU06481 Filter setCleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032HCaring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings PowerIndicator indicator Description Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Mute function is workingECO Mode function is working Not properly adjustedLamp is approaching the end of its product Lifetime Lens is dirty or mistySpecifications SpecificationSpecification Specifications