Dukane 8919H-RJ, 8920H-RJ, 8755J-RJ user manual Response Limit Time, Bytes Interval Timeout

Page 49

OPTION menu

Item

 

Description

 

 

 

 

 

RESPONSE LIMIT TIME

 

 

Select the time period to wait for receiving

 

 

response data from other device communicating by

 

 

the NETWORK BRIDGE and the HALF-DUPLEX

 

 

through the CONTROL port.

 

 

OFF ó 1s ó 2s ó 3s

 

 

OFF: Select this mode if it is not required to check

 

 

the responses from the device that the projector

 

 

sends data to. In this mode, the projector can

 

 

send out data from the computer continuously.

 

 

1s /2s /3s: Select the time period to keep the

 

 

projector waiting for response from the device

 

 

that the projector sends data to. While waiting the

 

 

response, the projector does not send out any

SERVICE

COMMUNICATION

data from the CONTROL port.

• This menu is available only when the NETWORK

(continued)

(continued)

BRIDGE is selected for the COMMUNICATION

 

 

 

 

TYPE and the HALF-DUPLEX is selected for the

 

 

TRANSMISSION METHOD (48).

 

 

• OFF is selected as the default setting.

 

 

BYTES INTERVAL TIMEOUT

 

 

Select the blank time length to judge that the

 

 

response data has finished in the communicating

 

 

in the condition of the NETWORK BRIDGE and

 

 

the HALF-DUPLEX through the CONTROL port.

 

 

50ms ó 100ms ó 150ms ó 200ms

This menu is available only when NETWORK BRIDGE is selected for the COMMUNICATION TYPE and HALF-DUPLEX is selected for the TRANSMISSION METHOD (48).

50ms is selected as the default setting.

(continued on next page)

49

Image 49
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Checking the contents of package Projector Part namesHOT Rear panel &9 Control panelDown button &14 Volume + button &16 Remote controlComputer button &17 STANDBY/ON button &15Arrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Monitor Connecting your devicesComputer VCR/DVD playerExternal device Connecting your devicesAbout Plug-and-Play capability Using the security bar and slot Connecting power supplyInstalling the batteries Remote controlAbout the remote control signal Using as a simple PC mouse & keyboard Changing the frequency of remote control signalTurning on the power Power on/offTurning off the power STANDBY/ON button Power indicatorSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundComputer button Press the MY Source / DOC. Camera button onVideo button MY Source For a computer signal Searching an input signal For a video signal, s-video signal or component video Signal 43  169   For no signalAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featureCorrecting the keystone distortions Using the magnify featureKeystone button MagnifyTemporarily blanking the screen Temporarily freezing the screenFreeze button Blank buttonReset button Using the menu functionEasy Menu Advanced MenuIndication in OSD On Screen Display Position buttonIndication Meaning Aspect Picture ModeAuto Keystone ExecuteReset ECO ModeMirror Filter TimeBrightness Picture menuContrast GammaCustom High  1 Custom  2 MID Color TintSAVE-1, SAVE-2, SAVE-3, SAVE-4 Active IrisFor no signal For a computer signalImage menu Over ScanFor a video signal and s-video signal PhaseAuto Adjust For a component video signalProgressive Input menuVideo NR Color SpaceComputer Video FormatFrame Lock Resolution Setup menu Monitor OUT Standby ModeAudio menu VolumeSpeaker Audio SourceBlank Screen menuStart UP Description MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message MyScreen LockTemplate Source NameDisplay Description Closed CaptionMode ChannelAuto Search Option menuAuto Direct onLamp Time Auto OFFMY Button Inputinformation  50, NetworkinformationFAN Speed ServiceGhost Filter MessageRemote Freq KEY LockControl port Communication Type Serial SettingsBaud Rate ParityResponse Limit Time Bytes Interval TimeoutInformation Factory ResetIt shows the information about the current input Network menu SetupDhcp Setup Gateway DefaultIP Address SubnetName ProjectorAMX D.D MY ImageInformation Security menu PasswordEnter the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen Turning on the PIN Lock PIN LockTurning off the PIN Lock If you have forgotten your PIN CodeTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceType number 456-8755H Replacing the lampLamp warning High Voltage High TemperatureType number MU06481 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Hitachi MAXELL, part number CR2032 or CR2032H Replacing the internal clock batteryOther care Caring for the cabinet and remote controlInside of the projector Caring for the lensRelated messages TroubleshootingRegarding the indicator lamps Power Resetting all settingsIndicator indicator Description Shutting the projector downSignal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Volume is adjusted to an extremely low levelColor Space setting is not suitable Mute function is workingNot properly adjusted ECO Mode function is workingLamp is approaching the end of its product Lifetime Lens is dirty or mistySpecification SpecificationsSpecification Specifications