Dukane 8755J-RJ, 8920H-RJ, 8919H-RJ user manual Source Name, Template

SCREEN menu

Item

Description

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button.

The SOURCE NAME menu will be displayed.

(2)Use the ▲/▼ buttons on the SOURCE

NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified.

The SOURCE NAME dialog will be displayed.

	(3) The current name will be displayed on
	the first line. Use the ▲/▼/◄/► buttons
	and the ENTER or INPUT button to
	select and enter characters. To erase 1
	character at one time, press the RESET
SOURCE NAME	button or press the ◄ and INPUT button
	at the same time. Also if you move the
	cursor to DELETE or ALL CLEAR on
	screen and press the ENTER or INPUT
	button, 1 character or all characters will
	be erased. The name can be a maximum
	of 16 characters.
	(4) To change an already inserted character,
	press the ▲ button to move the cursor to
	the first line, and use the ◄/► buttons to
	move the cursor on the character to be
	changed.
	After pressing the ENTER or INPUT button, the character is
	selected. Then, follow the same procedure as described at the
	item (3) above.
	(5) To finish entering text, move the cursor to the OK on screen and
	press the ►, ENTER or INPUT button. To revert to the previous
	name without saving changes, move the cursor to the CANCEL
	on screen and press the ◄, ENTER or INPUT button.
	Using the ▲/▼ buttons switches the mode for the template screen.
	Press the ► button to display the selected template, and press the
	◄ button to close the displayed screen.
TEMPLATE	The last selected template is displayed when the MY BUTTON
	allocated to the TEMPLATE function is pressed (45).
	TEST PATTERN ó DOT-LINE1
	DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2

(continued on next page)

41