Canon LV-S4 manual Image Level Adjustment

Computer Input

Image Level Adjustment

1	Press the MENU button and the On-Screen Menu will
	appear. Press the Point 7 8 buttons to move the red frame
	pointer to the Image Adjust Menu icon.
2	Press the Point d button to move the red frame pointer to
	the item that you want to adjust, and then press the OK

button. The level of each item is displayed. Adjust each level by pressing the Point 78 buttons.

Contrast

Press the Point 7 button to decrease contrast and the Point 8 button to increase contrast. (From 0 to 63.)

Brightness

Press the Point 7 button to adjust image darker and the Point 8 button to adjust image brighter. (From 0 to 63.)

Color temp.

Press the Point 7 button or the Point 8 button for Color temp. level that you want to select. (XLow, Low, Mid, or High)

White balance (Red)

Press the Point 7 button to lighten red tone and the Point 8 button to deepen red tone. (From 0 to 63.)

White balance (Green)

Press the Point 7 button to lighten green tone and the Point 8 button to deepen green tone. (From 0 to 63.)

White balance (Blue)

Press the Point 7 button to lighten blue tone and the Point 8 button to deepen blue tone. (From 0 to 63.)

Gamma

Press the Point 7 8 buttons to obtain better balance of contrast. (From 0 to 15.)

Reset

To reset the adjusted data, select Reset and press the OK button. The confirmation box will appear and then select [Yes]. All adjustments return to their previous figures.

Store

To store the image data adjusted manually, move the red frame pointer to the Store icon and press the OK button. The message “OK?” will appear. Select [Yes] to store manual adjustment.

To set this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p29).

If you change the Image level (p29) without storing the adjusted data, the figures will go back to the factory default settings.

Quit

Close the Image Level Adjustment.

✔Note:

•After adjusting any of the White balance Red, Green or Blue, the Color temp. will change to "Adj.".

Image Adjust Menu

Image Adjust Menu icon

Move the red frame pointer to the item to be selected and then press the OK button.

Selected Image Level

Press the Point 78buttons to adjust value.

Store icon

Press the OK button at this icon to store the adjustment.

“OK?” message

Move the pointer to [Yes] and then press the OK button.

30