Canon LV-S4 manual Some displays are not seen during the operation

Appendix

Some displays are not seen during the operation.

– Check the Display item. (See “Setting” on page 38.)

PIN code dialog box appears at start-up.– PIN code lock is being set. Input a PIN code (1234 or numbers you have set). (See “PIN code lock” on page 17 and 43.)

The Remote Control Unit does not work. – Check the batteries.

–Make sure no obstruction is between the projector and remote control unit.

–Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4’ (5m).

–Make sure the code of the remote control unit is conformed to the projector. (See page 42.)

–Unlock Key lock for the remote control unit in the Setting Menu. (See page 42.)

WARNING :

High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service.

Appendix

The CE Mark is a Directive conformity mark of the European Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

51