To Change the PIN code lock setting

Canon LV-S4 manual To Change the PIN code lock setting

Setting

PIN code lock

This function prevents the projector from being operated by an unauthorized person and provides the following settings for security options.

Off	the projector is not locked with the PIN code.
On1	require to enter the PIN code every time turning on
	the projector.
On2	require to enter the PIN code to operate the
	projector once the power cord is disconnected; as
	long as the AC power cord is connected, the
	projector can be operated without the PIN code.

Whenever to change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. "1234" is set as the initial PIN code at the factory.

Enter a PIN code

Select a number by pressing the Point 7 8 buttons and fix the number with the OK button. The number will change to "✳". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the OK button so that you can change the following PIN code lock settings.

If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a correct PIN code all over again.

To Change the PIN code lock setting

Select Off, On1, or On2 with the Point 7 8 buttons and then "Quit" with the Point d button and press the OK button to close the dialog box.

To Change the PIN code

The PIN code can be changed to your desired four-digit number.

Select "PIN code change" with the Point d button, and press the OK button. The New PIN code input dialog box will appear.

Select a number with the Point 78 buttons and fix the number with the OK button. Repeat it to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Then press the OK button.

Be sure to note the new PIN code and keep it at hand.

✔Note:

•If you forget your PIN code and unable to change it, the PIN code can be reset to the factory default setting (1234) according to the following procedures.

When you reset the PIN code, the Logo PIN code and Key lock will be reset, as well.

1.Disconnect the AC Power Cord from the AC outlet.

2.As pressing the OK button on the projector, connect the AC Power Cord into an AC outlet again. Keep pressing the OK button until the POWER indicator emits. The PIN code will be returned to the factory default setting while the PIN code lock state will remain the same as previous set state.

PIN code lock

When the projector is locked with the PIN code, the PIN code lock mark appears on the menu bar.

Enter a PIN code

Pointer

Quit

The input numbers change to “✳” for security.

When the pointer automatically move

to "Set", press the OK button.

Change the PIN code lock setting

Select a desired setting with the Point 78 buttons.

Change the PIN code

Select PIN code change and press the OK button. The New PIN code input dialog box will appear.

The input numbers are being displayed for confirmation.

Setting