Caring for Your Labelmaker, To clean the cutter blade

formats in any of the fields, however, if you select a location that is filled, the previous label format will be overwritten.

4.Select a field and press . The word Name? appears in the field.

5.Enter a name for the format and press . Your label format is saved and you are returned to the label.

Recalling Stored Labels and Formats

You can easily recall labels and formats stored in memory to use at a later time.

1.Press Memory .

2.Select Recall and then Label, Format, or Last Printed.

A list of memory locations is displayed similar to storing a label or format.

3.Select a label or format to recall and press .

Your labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance.

Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.

1.Press Ato turn off the power.

2.Open label cassette compartment and remove cassette.

3.Press and then Atogether. The message, Cut Test, appears on the display.

4. While holding down the Shift key, repeatedly

press . The cutter blade will move into view in small steps.

5.When you are able to access both sides of the blade, release the keys.

6.Use a cotton ball and alcohol to clean both sides of the cutter blade.

The cutter blade is extremely sharp. Use caution when cleaning.

7.After cleaning the blade, press to return the blade to its home position.

You can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move.

♦Clean the print head using the cleaning tool located inside the label cassette compartment lid. See Figure 11.

Figure 11