Using Mixed Formats
You can apply different fonts and format styles to the text on a label by inserting format breaks to divide the label into blocks or sections of text. Each section is separated by a format break. You can add two format breaks, allowing you to apply three separate formats to a label.
Alignment, underline, box styles, and background patterns cannot be mixed on a label.These styles are common to the entire label.
To add a format break
1.Enter and format text for the first section.
2.Press PreviewInsert .
3.Select Insert Format Break and press 
.
4.Continue entering and formatting text for the next section of the label.
Using Tabs
You can add tabs to a label to align text on multi- line labels. Tabs are left justified and the default spacing is 2.0” (50 mm).
To change the tab spacing
1.Press Settings .
2.Select Set Tab Length and press 
.
3.Use the up and down arrow keys to increase or
decrease the tab setting, and then press 
.
To insert a tab
1.Enter your text.
2.Press the 
key and continue entering text.
Using Symbols and
Special Characters
Symbols and other special characters can be added to your labels.
Adding Symbols
The labelmaker supports the extended symbol set as shown in Figure 10:
Figure 10
9