CARE AND CLEANING

(continued)

Lift-Off Oven Door

The oven door is removable, but it is heavy. You may need help removing and replacing the door. Do not lift the door by the handle. This can cause damage to the door.

To remove the door, open it a few inches to the special stop position that will hold the door open. Grasp firmly on each side and lift the door straight up and off the hinges.

NOTE: Be careful not to place hands between the hinge and the oven door frame as the hinge could snap back and pinch fingers.

To replace the door, make sure the hinges are in the special stop position. Position the slots in the bottom of the door squarely over the hinges. Then lower the door slowly and evenly over both hinges at the same time. If hinges snap back against the oven frame, pull them back out. If the oven door is crooked, push down on the high corner to straighten it.

TO CLEAN THE DOOR:

Inside of the door:

•Because the area inside the gasket is cleaned during the self clean cycle, you do not need to clean this by hand. Any soap left on the liner causes additional stains when the oven is heated.

•The area outside the gasket can be cleaned with a scouring pad.

•Do not rub or clean the door gasket—the fiberglass material of the gasket has an extremely low resistance to abrasion. An intact and well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

NOTE: The gasket is designed with a gap at the bottom to allow for proper air circulation.

Inside Gasket

Gasket

Outside Gasket

Outside of the door:

•Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well.

•Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

•Do not use oven cleaners, cleansing powders or harsh abrasives on the outside of the door.

Oven Heating Elements

Do not clean the bake element or the broil element.

Any soil will burn off when the elements are heated.

The bake element can be lifted gently to clean the oven floor. If spillovers, residue or ash accumulate around the bake element gently wipe around the element with warm water.

Broil Element

Bake Element

32

Page 31 Page 33
Page 32
Image 32
GE 49-8726, 164D2966P238 warranty Lift-Off Oven Door, Oven Heating Elements, Inside of the door, Outside of the door
Page 31 Page 33

164D2966P238, 49-8726 specifications

The GE 49-8726,164D2966P238 is a high-performance component designed for various industrial applications, showcasing advanced technologies and engineering excellence. This product is a testament to General Electric’s commitment to innovation and reliability in the field of electrical equipment.

At its core, the GE 49-8726,164D2966P238 is engineered to provide superior performance in a compact form factor, making it suitable for a variety of demanding environments. One of the most notable features of this product is its robust construction. Built with high-quality materials, it offers excellent durability and resistance to harsh conditions. This makes it ideal for use in industries such as manufacturing, energy, and transportation.

The device incorporates state-of-the-art technologies that enhance its functionality and efficiency. One of the key technologies used in the GE 49-8726,164D2966P238 is advanced thermal management, which ensures optimal operating temperatures, even under heavy loads. This feature significantly reduces the risk of overheating, thereby prolonging the lifespan of the component and ensuring consistent performance.

Another critical characteristic of the GE 49-8726,164D2966P238 is its adaptability. It can be integrated into various systems without the need for extensive modifications, providing flexibility in installation. This enables businesses to streamline their operations and minimize downtime, as the component can be easily replaced or upgraded.

In terms of electrical performance, the GE 49-8726,164D2966P238 boasts impressive specifications, including high wattage ratings and low power consumption. This not only enhances energy efficiency but also reduces operational costs, making it a cost-effective solution for enterprises looking to enhance their productivity without compromising on quality.

Safety is also a paramount consideration in the design of the GE 49-8726,164D2966P238. It includes various safety features that comply with industry standards, ensuring safe operations in potentially hazardous environments. These features protect both the equipment and the personnel involved in its operation.

In conclusion, the GE 49-8726,164D2966P238 stands out as a top-tier component characterized by its advanced technologies, robust construction, and exceptional performance. Its versatility and reliability make it an excellent choice for industries that demand high-quality solutions for their operational needs.
Top Page Image Contents