![](/images/new-backgrounds/1090424/9042461x1.webp)
CARE AND CLEANING
If your range is removed for cleaning, servicing or any reason, be sure
Proper care and cleaning are important so your radiant range will give you efficient and satisfactory service. If soil, mineral deposits from evaporated water spills or metal
Follow these directions carefully in caring for the radiant cooktop to help assure safe and proper maintenance.
Be sure that the surface unit control knobs are turned off and that the entire cooktop is cool before cleaning. (Sugar spills are the exception. Please see the Glass Cooktop Cleaning section.) Do not use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health and can chemically attack the glass surface.
BE SURE ELECTRIC POWER IS OFF BEFORE CLEANING ANY PART OF THE RANGE.
Operating the Self-Cleaning
Oven Light Replacement
CAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.
Wire cover holder
The oven light bulb is covered with a removable glass cover that is held in place with a
To remove:
1.Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.
DO NOT REMOVE ANY SCREWS TO REMOVE COVER.
2.Do not touch hot bulb with a wet cloth. Replace bulb with a
To replace cover:
1.Place it into groove of the light receptacle. Pull wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire is in the depression in the center of the cover.
2.Connect electrical power to the range.
(continued next page)
Oven
Care and Cleaning
31