GE 164D2966P238, 49-8726 warranty How to Set the Oven for Cleaning, Self, To Stop a Clean Cycle

How to Set the Oven for Cleaning

Quick Reminder:

1.Turn the OVEN SET and the OVEN TEMP knobs to CLEAN.

2.Latch the door.

3.Set the automatic oven timers.

1.Turn the OVEN SET and OVEN TEMP knobs to CLEAN. The controls will snap into position when the CLEAN location is reached.

2.Slide the latch

handle to the right as far as it will go.

Never force the latch handle. Forcing the handle will damage the door lock mechanism.

•The oven cycling light (below the OVEN TEMP knob), the cleaning light and the oven on light will glow, indicating that the self-clean cycle has begun. When the oven reaches a certain temperature, the oven door will lock. The latch handle cannot be moved until oven cleaning is complete and the oven cools down. Oven door and window get hot during self- clean cycle. DO NOT TOUCH.

•The oven will smoke the first time you use the self- clean cycle even though you have wiped up any excessive soil. This is normal and should stop in about 10 minutes. To help control the smoke, turn on the exhaust fan over the range when you use the self-clean cycle the first time.

Operating

3.Set the automatic timers.

STOP TIME	DELAY START
12	12

9 39 3

6 6

12

OFF 0 60

9	10	50	3
	20	40
		30

the Self

PUSH TO TURN

6

•Make sure both the clock and the DELAY START dial show the correct time of day. When the DELAY START knob is pushed in and turned, it will “pop” into place when the time shown on the clock is reached.

•Push in and turn the STOP TIME knob. Set the Stop Time for 3 hours later than present time of day—for example, if it is 6:00 now, set Stop Time for 9:00.

To Stop a Clean Cycle

1.Turn the OVEN SET knob or the OVEN TEMP knob to OFF.

2.Wait until the oven has cooled below the locking temperature to unlatch the door.

(continued next page)

29

-Cleaning Oven