Creative owner manual Installing the E-MU 0404 PCI Card, Slots

Page 11

2 - Installation

Installing the E-MU 0404 PCI Card

Installing the E-MU 0404 PCI Card

Note: This installation is very simple, but if you are not familiar with the installation of computer peripherals and add-in boards, please contact your authorized E-MU Systems dealer or an approved computer service center to arrange for the installation.

To install the 0404 PCI card into your computer

1.Make sure that the power switch on your computer is off.

IMPORTANT: Unplug the power cord from the wall outlet!

2.Touch a metal plate on your computer to ground yourself and to discharge any static electricity.

3.Follow the computer manufacturer’s recommended procedure for opening the case.

4.Remove the metal bracket from any available PCI slot. If you are installing a Sync Card as well, remove the bracket from two adjacent PCI slots. See figure 1 below.

E Note: Some

computer cases don’t use

screws to secure PCI

cards. In this case, follow

Figure 1

PCI

Slots

on(may

ISA

 

no

 

your

t

Slots

 

be

computeesent

 

 

pr

 

 

r)

Figure 2

the instructions that

came with your

computer.

5.Align the E-MU 0404 PCI card with the slot and press gently but firmly down into the slot as shown in figure 2.

6.Do not force the E-MU 0404 card into the slot. Make sure that the gold finger connector of the card is aligned with the PCI bus connector on the motherboard before you insert the card into the PCI slot. If it doesn’t fit properly, gently remove it and try again.

7.Secure the card into the slot using one of the screws you placed aside earlier.

8.Attach the Analog and Digital breakout cables to the rear of the 0404 card.

9.Connect your audio cables to the breakout cables.

E-MU Digital Audio System

3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 0404 Software Version Revision B MU 0404 Digital Audio SystemTable of Contents Effects Appendix Index MU Digital Audio System Components IntroductionWelcome System IncludesOptional Sync Daughter Card Setting Up the Digital Audio System InstallationName Description Connects Connector TypesSafety First Slots Installing the E-MU 0404 PCI CardTo install the 0404 PCI card into your computer Card Install the Sync CardSync Daughter Windows 2000 or Windows XP Software InstallationInstalling the E-MU 0404 Drivers Uninstalling all Audio Drivers and ApplicationsInstallation Software Installation Analog Output Connections PCI Card & InterfacesE-MU 0404 PCI Card Analog Breakout CablePdif Digital Audio Input & Output Digital Breakout CableAnalog Breakout CablePdif Midi Sound ModuleDigital Connections Midi CableSync Daughter Card Option Connecting Cables to the Sync Daughter CardTo Invoke the PatchMix DSP Mixer PatchMix DSP MixerPatchMix DSP Overview of the MixerPre Fader or Post Fader Mixer WindowMonitor MainRight-Click Here MU Icon in the Windows TaskbarToolbar New Session SessionSave Session Open SessionUsing External Clock Session SettingsSystem Settings Pdif Output Format SettingsPCI Card S/PDIF Input Input Mixer Strips To Delete a Mixer Strip Mixer Strip CreationTo Add a New Strip Multichannel Wave Files Working with Inserts Insert SectionInput Insert MenuTo Add a Send Insert To Add a Send/Return InsertRecordingPlayback Asio Direct Monitor Send/ReturnInput Meter Color Indicates Meter InsertsTo Add an Asio Direct Monitor Send/Return To Insert a Meter To Set the Input Levels of a StripMaking the Best Possible Recording Trim Pot Insert Test Tone/Signal Generator InsertTo Bypass All Inserts Managing Your InsertsTo Delete Effects from an Insert To Bypass an InsertAux Bus ChainAux Section Pan FaderPost-Fader Aux Send InputOutput Pre-Fader Aux SendLevel, Pan, Solo & Mute Controls Main Section Effect TV Screen & SelectorsOutput InputOutput Sync/Sample Rate IndicatorsAuxiliary Effects & Returns Input InputOutput Section Effect Categories Core Effects Multi-Effects EffectsOverview Effects PaletteTo Delete an Effect FX Insert ChainsTo Select an Effect To Edit an Effect88kHz, 96kHz, 176kHz & 192kHz Operation Creating, Renaming & Deleting Categories or PresetsTo Create a New Preset Category To Delete an Effect Category or PresetTo Export your FX Category Folders To Import Core FX PresetsTo Export your Core FX Presets To Import FX Category FoldersFX Edit Screen To Bypass ALL User Preset SectionTo Select a User Preset To Create a New User PresetTo Overwrite or Save a User Preset Core Effects and Effects PresetsTo Delete a User Preset To Rename a User PresetTotal Effects List of Core EffectsDSP Resource Usage ExampleLow Shelf Or… High Shelf Core Effects DescriptionsBand Para EQ Band Shelf EQMid Band High Shelf Setting up a Parametric EQBand EQ Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Filter Auto-WahCompressor VCA OutChorus Basic Controls Input Meter DistortionDistortion Flanger FlangerFreq Shifter Post Gain Leveling AmpEarly Reflections ReverberationTime Lite ReverbRolloff Mono Delays 100, 250, 500, 750, 1500Delay LFO Phase ShifterSpeaker Type Description RotarySpeaker Simulator Rolloff DelayStereo Delays 100, 250, 550, 750 Early Reflections Late Reverb Stereo ReverbFrequency Vocal MorpherMU PowerFX To Setup & Use E-MU PowerFX Setup Cubase LETo Record E-MU PowerFX parameter changes in Cubase LE Automating E-MU PowerFXMU PowerFX Resource Availability Application Name Compatible? Render Extra Buffers MU PowerFX Compatibility ChartTips for using Freeze Mode on Cubase LE Rendering Audio with E-MU PowerFXUsing E-MU PowerFX with WaveLab and SoundForge General Tips for Rendering using E-MU PowerFXWire VST plug-in MU VST E-WireTo Setup and use E-Wire Delay CompensatorPatchMix Delay Compensator UseDelay Units Parameter Cubase VST or CubasisGrouping Tracks PowerFX Or E-WirePowerFX Delay Or E-Wire Smpte Conversion Smpte FeaturesAppendix Sync Daughter Card SupplementSmpte Modes of Operation Host ModeExternal Mode Flywheel ModeTypes of Smpte Stripe ModeSmpte Background Time CodeFrames-per-second Resolution Why use SMPTE?Avoiding Smpte problems Smpte Subframe ResolutionDuplicating Smpte time code Other Tips for using SmpteMidi Time Code MTC To Synchronize PatchMix DSP to an External Clock Source Word Clock In/OutHouse Sync Generator Digital Device Word Clock Termination on Digital MixerAdat Optical Word Clock Termination OFFPatchMix DSP supplies Master Clock Getting in SyncExternal Device supplies Master Clock Digital Cables Appearance Settings in WindowsUseful Information AES/EBU to S/PDIF Cable AdapterDynamic Range Channel Crosstalk Input Impedance Technical SpecificationsSample Rates Bit Depth Hardware DSP Converters & OpAmps Type Level Frequency ResponseSync Daughter Card Dimensions & WeightPCI Card Forums Internet ReferencesResponsible Party Declaration of ConformityTrade Name Model NoCompliance Information Numerics IndexMidi Index Midi

0404 specifications

Creative 0404 is a premium audio interface designed for musicians, podcasters, and audiophiles seeking high-quality sound reproduction and versatile connectivity options. One of its standout features is its ability to support high-resolution audio up to 24-bit/192 kHz, ensuring that every detail is captured faithfully during recording and playback. This makes it an ideal choice for those who prioritize sound clarity and depth in their projects.

The device boasts a sleek, compact design that is both portable and user-friendly. It includes a sturdy chassis that can withstand the rigors of travel while maintaining a professional appearance in studio settings. The Creative 0404 features multiple input and output options, including combo XLR/TRS inputs with switchable phantom power, allowing users to connect a variety of microphones and instruments. This flexibility is essential for those working in diverse audio environments.

One of the key technologies employed in the Creative 0404 is its high-performance DAC (digital-to-analog converter), which plays a crucial role in delivering pristine sound quality. The DAC minimizes distortion and noise, ensuring the signal integrity is retained throughout the audio chain. Additionally, the device incorporates advanced audio processing capabilities, allowing for real-time monitoring and effects.

The interface is compatible with various operating systems, including Windows and macOS, and works seamlessly with popular digital audio workstations (DAWs). This compatibility ensures that users can easily integrate the Creative 0404 into their existing workflows. Another notable feature is its low-latency performance, which is essential for live recordings and performances, enabling musicians to monitor their inputs without distractions.

Moreover, the Creative 0404 comes with a suite of software tools that enhance its usability. This includes recording, editing, and mixing software, as well as various plug-ins that allow users to expand their creative possibilities. Its straightforward controls and intuitive layout make it accessible for both beginners and seasoned professionals.

In summary, the Creative 0404 is a feature-rich audio interface that combines high-performance audio quality, versatile connectivity, and ease of use. Whether for home studios, podcasts, or live performances, it offers the tools necessary to produce professional-sounding audio effortlessly. It represents a perfect blend of technology and practicality, catering to the needs of modern audio creators.
Top Page Image Contents