Creative 0404 owner manual New Session

Page 22

4 - The PatchMix DSP Mixer

The Session

The Session

The current state of the PatchMix DSP mixer (fader settings, effects routings…every- thing!) can be saved as a Session. Whenever you create or modify a mixer setup, all you have to do is Save it to be able to recall it at a later time.

Before you begin using PatchMix DSP, you need to set it up to be compatible with the other software applications you may be running. The most important consideration is your system sample rate. PatchMix DSP and any applications or other digital gear you are using must be set to the same sample rate. PatchMix DSP can run at 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4 kHz or 192kHz sample rates, but the effect processors are only available at the 44.1kHz or 48kHz rates.

When you start a new PatchMix DSP Session, the first choice you make is to select the sample rate. Once set, you can only easily switch between 44.1kHz and 48kHz. You cannot switch between 44/48kHz and 88k/96k/176k/192k. With a change to these high sample rates, you must start a new session.

You can also set up an external sync source, thereby obtaining the sample rate from some other device or application. External sync can be obtained from either S/PDIF input or the Sync Daughter Card (word clock). If the session is set at 44.1kHz or 48kHz and the external source is coming in at 96kHz, the Sync Indicator will be extinguished (off), but PatchMix will attempt to receive the external data. if the Sync Indicator is Off, the two units are NOT sample locked and you should correct this condition to avoid intermittent clicks in the audio. Always check for the presence of the “LOCKED” indicator whenever you are using a digital interface.

PatchMix DSP comes with several session templates to choose from so when you create a new session you can either create a “blank” session based around a designated sample rate, or select from a list of template starting points.

In a PatchMix DSP session the number of strips in the mixer is dynamically config- urable. See Pre Fader or Post Fader. This allows you to create only those strips you need up to a maximum number determined by available DSP resources and available inputs.

New Session

You create a new session by clicking the “New Session” button in the PatchMix DSP main Toolbar. The following dialog box appears.

Important: When using any form of digital input, you MUST synchronize the Digital Audio System to the external digital device. See Using External Clock

Select a Template or new Session at the desired sample rate

Session Description

Add your own comment or note about the Session

Check this if you want to edit the New Session.

14

Creative Professional

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 0404 MU 0404 Digital Audio System Software Version Revision BTable of Contents Effects Appendix Index System Includes IntroductionWelcome MU Digital Audio System ComponentsOptional Sync Daughter Card Installation Setting Up the Digital Audio SystemSafety First Connector TypesName Description Connects To install the 0404 PCI card into your computer Installing the E-MU 0404 PCI CardSlots Sync Daughter Install the Sync CardCard Uninstalling all Audio Drivers and Applications Software InstallationInstalling the E-MU 0404 Drivers Windows 2000 or Windows XPInstallation Software Installation Analog Breakout Cable PCI Card & InterfacesE-MU 0404 PCI Card Analog Output ConnectionsBreakout Cable Digital Breakout CableAnalog Pdif Digital Audio Input & OutputMidi Cable Midi Sound ModuleDigital Connections PdifConnecting Cables to the Sync Daughter Card Sync Daughter Card OptionOverview of the Mixer PatchMix DSP MixerPatchMix DSP To Invoke the PatchMix DSP MixerMain Mixer WindowMonitor Pre Fader or Post FaderToolbar MU Icon in the Windows TaskbarRight-Click Here Session New SessionOpen Session Save SessionSystem Settings Session SettingsUsing External Clock PCI Card S/PDIF Input SettingsPdif Output Format Input Mixer Strips To Add a New Strip Mixer Strip CreationTo Delete a Mixer Strip Multichannel Wave Files Insert Section Working with InsertsTo Add a Send/Return Insert Insert MenuTo Add a Send Insert InputInput Asio Direct Monitor Send/ReturnRecordingPlayback To Add an Asio Direct Monitor Send/Return Meter InsertsMeter Color Indicates To Set the Input Levels of a Strip To Insert a MeterMaking the Best Possible Recording Test Tone/Signal Generator Insert Trim Pot InsertTo Bypass an Insert Managing Your InsertsTo Delete Effects from an Insert To Bypass All InsertsPan Fader ChainAux Section Aux BusPre-Fader Aux Send InputOutput Post-Fader Aux SendLevel, Pan, Solo & Mute Controls Main Section TV Screen & Selectors EffectInput OutputInput Input Sync/Sample Rate IndicatorsAuxiliary Effects & Returns OutputOutput Section Effects Palette EffectsOverview Effect Categories Core Effects Multi-EffectsTo Edit an Effect FX Insert ChainsTo Select an Effect To Delete an EffectTo Delete an Effect Category or Preset Creating, Renaming & Deleting Categories or PresetsTo Create a New Preset Category 88kHz, 96kHz, 176kHz & 192kHz OperationTo Import FX Category Folders To Import Core FX PresetsTo Export your Core FX Presets To Export your FX Category FoldersFX Edit Screen To Create a New User Preset User Preset SectionTo Select a User Preset To Bypass ALLTo Rename a User Preset Core Effects and Effects PresetsTo Delete a User Preset To Overwrite or Save a User PresetExample List of Core EffectsDSP Resource Usage Total EffectsBand Shelf EQ Core Effects DescriptionsBand Para EQ Low Shelf Or… High ShelfBand EQ Setting up a Parametric EQMid Band High Shelf Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Auto-Wah FilterChorus VCA OutCompressor Basic Controls Distortion DistortionInput Meter Flanger FlangerFreq Shifter Leveling Amp Post GainLite Reverb Early Reflections ReverberationTimeDelay Mono Delays 100, 250, 500, 750, 1500Rolloff Phase Shifter LFOSpeaker Simulator RotarySpeaker Type Description Stereo Delays 100, 250, 550, 750 DelayRolloff Stereo Reverb Early Reflections Late ReverbVocal Morpher FrequencyMU PowerFX Setup Cubase LE To Setup & Use E-MU PowerFXMU PowerFX Resource Availability Automating E-MU PowerFXTo Record E-MU PowerFX parameter changes in Cubase LE MU PowerFX Compatibility Chart Application Name Compatible? Render Extra BuffersGeneral Tips for Rendering using E-MU PowerFX Rendering Audio with E-MU PowerFXUsing E-MU PowerFX with WaveLab and SoundForge Tips for using Freeze Mode on Cubase LEMU VST E-Wire Wire VST plug-inDelay Compensator To Setup and use E-WireCubase VST or Cubasis Delay Compensator UseDelay Units Parameter PatchMixPowerFX Delay Or E-Wire PowerFX Or E-WireGrouping Tracks Sync Daughter Card Supplement Smpte FeaturesAppendix Smpte ConversionFlywheel Mode Host ModeExternal Mode Smpte Modes of OperationTime Code Stripe ModeSmpte Background Types of SmpteSmpte Subframe Resolution Why use SMPTE?Avoiding Smpte problems Frames-per-second ResolutionMidi Time Code MTC Other Tips for using SmpteDuplicating Smpte time code House Sync Generator Digital Device Word Clock In/OutTo Synchronize PatchMix DSP to an External Clock Source Word Clock Termination OFF Digital MixerAdat Optical Word Clock Termination onExternal Device supplies Master Clock Getting in SyncPatchMix DSP supplies Master Clock AES/EBU to S/PDIF Cable Adapter Appearance Settings in WindowsUseful Information Digital CablesType Level Frequency Response Technical SpecificationsSample Rates Bit Depth Hardware DSP Converters & OpAmps Dynamic Range Channel Crosstalk Input ImpedancePCI Card Dimensions & WeightSync Daughter Card Internet References ForumsModel No Declaration of ConformityTrade Name Responsible PartyCompliance Information Index NumericsMidi Index Midi

0404 specifications

Creative 0404 is a premium audio interface designed for musicians, podcasters, and audiophiles seeking high-quality sound reproduction and versatile connectivity options. One of its standout features is its ability to support high-resolution audio up to 24-bit/192 kHz, ensuring that every detail is captured faithfully during recording and playback. This makes it an ideal choice for those who prioritize sound clarity and depth in their projects.

The device boasts a sleek, compact design that is both portable and user-friendly. It includes a sturdy chassis that can withstand the rigors of travel while maintaining a professional appearance in studio settings. The Creative 0404 features multiple input and output options, including combo XLR/TRS inputs with switchable phantom power, allowing users to connect a variety of microphones and instruments. This flexibility is essential for those working in diverse audio environments.

One of the key technologies employed in the Creative 0404 is its high-performance DAC (digital-to-analog converter), which plays a crucial role in delivering pristine sound quality. The DAC minimizes distortion and noise, ensuring the signal integrity is retained throughout the audio chain. Additionally, the device incorporates advanced audio processing capabilities, allowing for real-time monitoring and effects.

The interface is compatible with various operating systems, including Windows and macOS, and works seamlessly with popular digital audio workstations (DAWs). This compatibility ensures that users can easily integrate the Creative 0404 into their existing workflows. Another notable feature is its low-latency performance, which is essential for live recordings and performances, enabling musicians to monitor their inputs without distractions.

Moreover, the Creative 0404 comes with a suite of software tools that enhance its usability. This includes recording, editing, and mixing software, as well as various plug-ins that allow users to expand their creative possibilities. Its straightforward controls and intuitive layout make it accessible for both beginners and seasoned professionals.

In summary, the Creative 0404 is a feature-rich audio interface that combines high-performance audio quality, versatile connectivity, and ease of use. Whether for home studios, podcasts, or live performances, it offers the tools necessary to produce professional-sounding audio effortlessly. It represents a perfect blend of technology and practicality, catering to the needs of modern audio creators.
Top Page Image Contents