Creative 0404 Useful Information, AES/EBU to S/PDIF Cable Adapter, Digital Cables, Grounding

Page 87

6 - Appendix

Useful Information

Useful Information

AES/EBU to S/PDIF Cable Adapter

This simple adapter cable allows you to receive AES/EBU digital audio via the S/PDIF input on the E-MU 0404 PCI card. This cable may also work to connect S/PDIF out from the 0404 digital breakout cable to the AES/EBU input of other digital equipment.

From AES/EBU

Device

 

2 +

To S/PDIF

1

In

N.C.

3

-

Digital Cables

Don’t cheap out! Use high quality optical fiber and low-capacitance electrical cables when transferring digital I/O to avoid data corruption. It’s also a good idea to keep digital cabling as short as possible (1.5 meters for plastic light pipes; 5 meters for high quality glass fiber light pipes).

Grounding

In order to obtain best results and lowest noise levels, make sure that your computer and any external audio devices are grounded to the same reference. This usually means that you should be using grounded AC cables on both systems and make sure that both systems are connected to the same grounded outlet. Failure to observe this common practice can result in a ground loop. 60 cycle hum in the audio signal is almost always caused by a ground loop.

Appearance Settings in Windows

Adjusting the “Performance Options” in Windows will improve the screen appearance when moving the mixer around on the screen.

To Improve the Appearance Settings:

1.Open the Windows Control Panel. (Start, Settings, Control Panel).

2.Select System. Select the Advanced Settings tab.

3.Select Settings in the Performance section.

4.Under Visual Effects, select Adjust for Best Performance. Click OK.

E-MU Digital Audio System

79

Page 86 Page 88
Image 87
Page 86 Page 88
Contents 0404 Software Version Revision B MU 0404 Digital Audio SystemTable of Contents Effects Appendix Index MU Digital Audio System Components IntroductionWelcome System IncludesOptional Sync Daughter Card Setting Up the Digital Audio System InstallationConnector Types Safety FirstName Description Connects Installing the E-MU 0404 PCI Card To install the 0404 PCI card into your computerSlots Install the Sync Card Sync DaughterCard Windows 2000 or Windows XP Software InstallationInstalling the E-MU 0404 Drivers Uninstalling all Audio Drivers and ApplicationsInstallation Software Installation Analog Output Connections PCI Card & InterfacesE-MU 0404 PCI Card Analog Breakout CablePdif Digital Audio Input & Output Digital Breakout CableAnalog Breakout CablePdif Midi Sound ModuleDigital Connections Midi CableSync Daughter Card Option Connecting Cables to the Sync Daughter CardTo Invoke the PatchMix DSP Mixer PatchMix DSP MixerPatchMix DSP Overview of the MixerPre Fader or Post Fader Mixer WindowMonitor MainMU Icon in the Windows Taskbar ToolbarRight-Click Here New Session SessionSave Session Open SessionSession Settings System SettingsUsing External Clock Settings PCI Card S/PDIF InputPdif Output Format Input Mixer Strips Mixer Strip Creation To Add a New StripTo Delete a Mixer Strip Multichannel Wave Files Working with Inserts Insert SectionInput Insert MenuTo Add a Send Insert To Add a Send/Return InsertAsio Direct Monitor Send/Return InputRecordingPlayback Meter Inserts To Add an Asio Direct Monitor Send/ReturnMeter Color Indicates To Insert a Meter To Set the Input Levels of a StripMaking the Best Possible Recording Trim Pot Insert Test Tone/Signal Generator InsertTo Bypass All Inserts Managing Your InsertsTo Delete Effects from an Insert To Bypass an InsertAux Bus ChainAux Section Pan FaderPost-Fader Aux Send InputOutput Pre-Fader Aux SendLevel, Pan, Solo & Mute Controls Main Section Effect TV Screen & SelectorsOutput InputOutput Sync/Sample Rate IndicatorsAuxiliary Effects & Returns Input InputOutput Section Effect Categories Core Effects Multi-Effects EffectsOverview Effects PaletteTo Delete an Effect FX Insert ChainsTo Select an Effect To Edit an Effect88kHz, 96kHz, 176kHz & 192kHz Operation Creating, Renaming & Deleting Categories or PresetsTo Create a New Preset Category To Delete an Effect Category or PresetTo Export your FX Category Folders To Import Core FX PresetsTo Export your Core FX Presets To Import FX Category FoldersFX Edit Screen To Bypass ALL User Preset SectionTo Select a User Preset To Create a New User PresetTo Overwrite or Save a User Preset Core Effects and Effects PresetsTo Delete a User Preset To Rename a User PresetTotal Effects List of Core EffectsDSP Resource Usage ExampleLow Shelf Or… High Shelf Core Effects DescriptionsBand Para EQ Band Shelf EQSetting up a Parametric EQ Band EQMid Band High Shelf Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Filter Auto-WahVCA Out ChorusCompressor Basic Controls Distortion DistortionInput Meter Flanger FlangerFreq Shifter Post Gain Leveling AmpEarly Reflections ReverberationTime Lite ReverbMono Delays 100, 250, 500, 750, 1500 DelayRolloff LFO Phase ShifterRotary Speaker SimulatorSpeaker Type Description Delay Stereo Delays 100, 250, 550, 750Rolloff Early Reflections Late Reverb Stereo ReverbFrequency Vocal MorpherMU PowerFX To Setup & Use E-MU PowerFX Setup Cubase LEAutomating E-MU PowerFX MU PowerFX Resource AvailabilityTo Record E-MU PowerFX parameter changes in Cubase LE Application Name Compatible? Render Extra Buffers MU PowerFX Compatibility ChartTips for using Freeze Mode on Cubase LE Rendering Audio with E-MU PowerFXUsing E-MU PowerFX with WaveLab and SoundForge General Tips for Rendering using E-MU PowerFXWire VST plug-in MU VST E-WireTo Setup and use E-Wire Delay CompensatorPatchMix Delay Compensator UseDelay Units Parameter Cubase VST or CubasisPowerFX Or E-Wire PowerFX Delay Or E-WireGrouping Tracks Smpte Conversion Smpte FeaturesAppendix Sync Daughter Card SupplementSmpte Modes of Operation Host ModeExternal Mode Flywheel ModeTypes of Smpte Stripe ModeSmpte Background Time CodeFrames-per-second Resolution Why use SMPTE?Avoiding Smpte problems Smpte Subframe ResolutionOther Tips for using Smpte Midi Time Code MTCDuplicating Smpte time code Word Clock In/Out House Sync Generator Digital DeviceTo Synchronize PatchMix DSP to an External Clock Source Word Clock Termination on Digital MixerAdat Optical Word Clock Termination OFFGetting in Sync External Device supplies Master ClockPatchMix DSP supplies Master Clock Digital Cables Appearance Settings in WindowsUseful Information AES/EBU to S/PDIF Cable AdapterDynamic Range Channel Crosstalk Input Impedance Technical SpecificationsSample Rates Bit Depth Hardware DSP Converters & OpAmps Type Level Frequency ResponseDimensions & Weight PCI CardSync Daughter Card Forums Internet ReferencesResponsible Party Declaration of ConformityTrade Name Model NoCompliance Information Numerics IndexMidi Index Midi

0404 specifications

Creative 0404 is a premium audio interface designed for musicians, podcasters, and audiophiles seeking high-quality sound reproduction and versatile connectivity options. One of its standout features is its ability to support high-resolution audio up to 24-bit/192 kHz, ensuring that every detail is captured faithfully during recording and playback. This makes it an ideal choice for those who prioritize sound clarity and depth in their projects.

The device boasts a sleek, compact design that is both portable and user-friendly. It includes a sturdy chassis that can withstand the rigors of travel while maintaining a professional appearance in studio settings. The Creative 0404 features multiple input and output options, including combo XLR/TRS inputs with switchable phantom power, allowing users to connect a variety of microphones and instruments. This flexibility is essential for those working in diverse audio environments.

One of the key technologies employed in the Creative 0404 is its high-performance DAC (digital-to-analog converter), which plays a crucial role in delivering pristine sound quality. The DAC minimizes distortion and noise, ensuring the signal integrity is retained throughout the audio chain. Additionally, the device incorporates advanced audio processing capabilities, allowing for real-time monitoring and effects.

The interface is compatible with various operating systems, including Windows and macOS, and works seamlessly with popular digital audio workstations (DAWs). This compatibility ensures that users can easily integrate the Creative 0404 into their existing workflows. Another notable feature is its low-latency performance, which is essential for live recordings and performances, enabling musicians to monitor their inputs without distractions.

Moreover, the Creative 0404 comes with a suite of software tools that enhance its usability. This includes recording, editing, and mixing software, as well as various plug-ins that allow users to expand their creative possibilities. Its straightforward controls and intuitive layout make it accessible for both beginners and seasoned professionals.

In summary, the Creative 0404 is a feature-rich audio interface that combines high-performance audio quality, versatile connectivity, and ease of use. Whether for home studios, podcasts, or live performances, it offers the tools necessary to produce professional-sounding audio effortlessly. It represents a perfect blend of technology and practicality, catering to the needs of modern audio creators.
Top Page Image Contents