Creative 0404 owner manual Output Section

Page 44

4 - The PatchMix DSP Mixer

Main Section

Output Section

Main Output Level Fader

Sync/Sample

 

Rate Indicators

Main

 

Insert

 

Section

Monitor

 

Mute

 

Monitor

 

Balance

Output Level

Monitor

Meters

Volume

Main Inserts

The main inserts allow you to apply effects to the main stereo signal coming out of the mixer (both mains and monitor). You might want to apply EQ or a compressor here. These inserts work just like the other effect locations—just drag and drop effects from the palette or right-click and add Sends, Sends/Returns. etc. Refer to the Mixer Block Diagram

Main Output Fader

The main output fader controls the level of the main output (and the Monitor output as well since it is downstream from this control). The normal setting for this control is at unity or 0dB, but the control allows you to add up to +12dB of gain. High output levels may cause clipping on outboard amplifiers or other equipment.

Output Level Meters

This stereo bar-graph meter reflects the digital level at the output of the mixer. The topmost red bar represents 0 dB or a full-scale digital signal. The peaks hold for a moment so that short transients can be monitored. Each bar = 1dB.

Monitor Output Level

This control adjusts the monitor output level. Keep in mind that since the monitor level control comes after the Main Output Fader, nothing will be heard from your monitors if the main level is turned down.

Monitor Balance Control

This control sets the relative volume of the stereo monitor outputs and works just like the balance control on your home music system. This control is primarily used to make the volume from each speaker sound equal if you are not sitting exactly in the center of the two speakers.

Monitor Output Mute

This button completely cuts off the monitor output and provides a convenient way to instantly kill all sound without having to re-adjust the monitor level later. When the telephone rings, just hit the monitor mute to cut the noise.

MAIN MIX

0dB

10 10 -12dB

2020

3030

4040

50 50

L R

fTip: The volume control on a multimedia computer keyboard can be used to control the Monitor Output Level on PatchMix.

36

Creative Professional

Page 43 Page 45
Image 44
Page 43 Page 45
Contents 0404 MU 0404 Digital Audio System Software Version Revision BTable of Contents Effects Appendix Index Introduction WelcomeSystem Includes MU Digital Audio System ComponentsOptional Sync Daughter Card Installation Setting Up the Digital Audio SystemName Description Connects Connector TypesSafety First Slots Installing the E-MU 0404 PCI CardTo install the 0404 PCI card into your computer Card Install the Sync CardSync Daughter Software Installation Installing the E-MU 0404 DriversUninstalling all Audio Drivers and Applications Windows 2000 or Windows XPInstallation Software Installation PCI Card & Interfaces E-MU 0404 PCI CardAnalog Breakout Cable Analog Output ConnectionsDigital Breakout Cable AnalogBreakout Cable Pdif Digital Audio Input & OutputMidi Sound Module Digital ConnectionsMidi Cable PdifConnecting Cables to the Sync Daughter Card Sync Daughter Card OptionPatchMix DSP Mixer PatchMix DSPOverview of the Mixer To Invoke the PatchMix DSP MixerMixer Window MonitorMain Pre Fader or Post FaderRight-Click Here MU Icon in the Windows TaskbarToolbar Session New SessionOpen Session Save SessionUsing External Clock Session SettingsSystem Settings Pdif Output Format SettingsPCI Card S/PDIF Input Input Mixer Strips To Delete a Mixer Strip Mixer Strip CreationTo Add a New Strip Multichannel Wave Files Insert Section Working with InsertsInsert Menu To Add a Send InsertTo Add a Send/Return Insert InputRecordingPlayback Asio Direct Monitor Send/ReturnInput Meter Color Indicates Meter InsertsTo Add an Asio Direct Monitor Send/Return To Set the Input Levels of a Strip To Insert a MeterMaking the Best Possible Recording Test Tone/Signal Generator Insert Trim Pot InsertManaging Your Inserts To Delete Effects from an InsertTo Bypass an Insert To Bypass All InsertsChain Aux SectionPan Fader Aux BusInput OutputPre-Fader Aux Send Post-Fader Aux SendLevel, Pan, Solo & Mute Controls Main Section TV Screen & Selectors EffectInput OutputSync/Sample Rate Indicators Auxiliary Effects & ReturnsInput Input OutputOutput Section Effects OverviewEffects Palette Effect Categories Core Effects Multi-EffectsFX Insert Chains To Select an EffectTo Edit an Effect To Delete an EffectCreating, Renaming & Deleting Categories or Presets To Create a New Preset CategoryTo Delete an Effect Category or Preset 88kHz, 96kHz, 176kHz & 192kHz OperationTo Import Core FX Presets To Export your Core FX PresetsTo Import FX Category Folders To Export your FX Category FoldersFX Edit Screen User Preset Section To Select a User PresetTo Create a New User Preset To Bypass ALLCore Effects and Effects Presets To Delete a User PresetTo Rename a User Preset To Overwrite or Save a User PresetList of Core Effects DSP Resource UsageExample Total EffectsCore Effects Descriptions Band Para EQBand Shelf EQ Low Shelf Or… High ShelfMid Band High Shelf Setting up a Parametric EQBand EQ Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Auto-Wah FilterCompressor VCA OutChorus Basic Controls Input Meter DistortionDistortion Flanger FlangerFreq Shifter Leveling Amp Post GainLite Reverb Early Reflections ReverberationTimeRolloff Mono Delays 100, 250, 500, 750, 1500Delay Phase Shifter LFOSpeaker Type Description RotarySpeaker Simulator Rolloff DelayStereo Delays 100, 250, 550, 750 Stereo Reverb Early Reflections Late ReverbVocal Morpher FrequencyMU PowerFX Setup Cubase LE To Setup & Use E-MU PowerFXTo Record E-MU PowerFX parameter changes in Cubase LE Automating E-MU PowerFXMU PowerFX Resource Availability MU PowerFX Compatibility Chart Application Name Compatible? Render Extra BuffersRendering Audio with E-MU PowerFX Using E-MU PowerFX with WaveLab and SoundForgeGeneral Tips for Rendering using E-MU PowerFX Tips for using Freeze Mode on Cubase LEMU VST E-Wire Wire VST plug-inDelay Compensator To Setup and use E-WireDelay Compensator Use Delay Units ParameterCubase VST or Cubasis PatchMixGrouping Tracks PowerFX Or E-WirePowerFX Delay Or E-Wire Smpte Features AppendixSync Daughter Card Supplement Smpte ConversionHost Mode External ModeFlywheel Mode Smpte Modes of OperationStripe Mode Smpte BackgroundTime Code Types of SmpteWhy use SMPTE? Avoiding Smpte problemsSmpte Subframe Resolution Frames-per-second ResolutionDuplicating Smpte time code Other Tips for using SmpteMidi Time Code MTC To Synchronize PatchMix DSP to an External Clock Source Word Clock In/OutHouse Sync Generator Digital Device Digital Mixer Adat OpticalWord Clock Termination OFF Word Clock Termination onPatchMix DSP supplies Master Clock Getting in SyncExternal Device supplies Master Clock Appearance Settings in Windows Useful InformationAES/EBU to S/PDIF Cable Adapter Digital CablesTechnical Specifications Sample Rates Bit Depth Hardware DSP Converters & OpAmpsType Level Frequency Response Dynamic Range Channel Crosstalk Input ImpedanceSync Daughter Card Dimensions & WeightPCI Card Internet References ForumsDeclaration of Conformity Trade NameModel No Responsible PartyCompliance Information Index NumericsMidi Index Midi

0404 specifications

Creative 0404 is a premium audio interface designed for musicians, podcasters, and audiophiles seeking high-quality sound reproduction and versatile connectivity options. One of its standout features is its ability to support high-resolution audio up to 24-bit/192 kHz, ensuring that every detail is captured faithfully during recording and playback. This makes it an ideal choice for those who prioritize sound clarity and depth in their projects.

The device boasts a sleek, compact design that is both portable and user-friendly. It includes a sturdy chassis that can withstand the rigors of travel while maintaining a professional appearance in studio settings. The Creative 0404 features multiple input and output options, including combo XLR/TRS inputs with switchable phantom power, allowing users to connect a variety of microphones and instruments. This flexibility is essential for those working in diverse audio environments.

One of the key technologies employed in the Creative 0404 is its high-performance DAC (digital-to-analog converter), which plays a crucial role in delivering pristine sound quality. The DAC minimizes distortion and noise, ensuring the signal integrity is retained throughout the audio chain. Additionally, the device incorporates advanced audio processing capabilities, allowing for real-time monitoring and effects.

The interface is compatible with various operating systems, including Windows and macOS, and works seamlessly with popular digital audio workstations (DAWs). This compatibility ensures that users can easily integrate the Creative 0404 into their existing workflows. Another notable feature is its low-latency performance, which is essential for live recordings and performances, enabling musicians to monitor their inputs without distractions.

Moreover, the Creative 0404 comes with a suite of software tools that enhance its usability. This includes recording, editing, and mixing software, as well as various plug-ins that allow users to expand their creative possibilities. Its straightforward controls and intuitive layout make it accessible for both beginners and seasoned professionals.

In summary, the Creative 0404 is a feature-rich audio interface that combines high-performance audio quality, versatile connectivity, and ease of use. Whether for home studios, podcasts, or live performances, it offers the tools necessary to produce professional-sounding audio effortlessly. It represents a perfect blend of technology and practicality, catering to the needs of modern audio creators.
Top Page Image Contents