Creative 0404 Auxiliary Effects & Returns, Sync/Sample Rate Indicators, Input Input, Output

Page 43

Auxiliary Effects & Returns

The section immediately below the TV Screen is where you assign the Auxiliary Effects. In a traditional mixing console, auxiliary effects sends are used to send part of the signal to outboard effect devices, then return the effected signal back into the mix using the effect returns. This is called a sidechain routing because the aux signal takes a detour through the effects before being summed back into the main mix.

Sidechain effects are usually effects that you might want applied to several channels, such as reverb. Effects such as EQ and compressors are usually NOT used as sidechain effects because they can cause unpredictable results when returned to the main bus.

Input Input

Sidechain Diagram

Pan

 

(Post-Fader Aux Sends)

 

 

 

Fader

Aux

 

 

Mute

 

 

Amt

Send

Return

 

 

 

 

Amount

Amount

Aux

 

 

Side

Amt

Aux Bus

Chain

Main Bus

Output

You can also use the Auxiliary Sends as two extra mix buses. By turning the Aux Return amount all the way down and dropping an Insert Send into the chain, you can send the Auxiliary bus to any output you wish. See “Insert Section” for more information.‚

Sync/Sample Rate Indicators

The Sync/Sample rate Indicators show the current session’s sample rate and whether it is internal or slaving to an external source. The LEDs indicate which sample rate is currently in effect. If an external source is being used, the Source display reads “EXTERNAL”.

When slaving to an external master source, the clock may drift slightly or change dramatically (i.e. abrupt sample rate change or unplugging of physical master source). PatchMix DSP is tolerant to minor drifting within the supported rates of 44.1k, 48k, 88.2k, 96k, 176.4k, but if the sample rate drifts out of this range the “LOCKED” LED will extinguish.

If the external clock source makes a radical sample rate change from the lower rates of 44.1k/48k to a higher rate or between the rates of 88k/96k and 176k/192kHz, the hardware automatically switches to internal 48kHz clock until the proper external clock is restored. The “LOCKED” LED will be off and the two units are NOT synchronized. Always check the “LOCKED” LED when using an external clock source.

4 - The PatchMix DSP Mixer Main Section

fThe Wet/Dry mix setting in the effect should normally be set to 100% when the effect is inserted as a sidechain effect. This is because the Aux Return Amount will control the wet/dry mix.

E-MU Digital Audio System

35

Page 42 Page 44
Image 43
Page 42 Page 44
Contents 0404 Software Version Revision B MU 0404 Digital Audio SystemTable of Contents Effects Appendix Index MU Digital Audio System Components IntroductionWelcome System IncludesOptional Sync Daughter Card Setting Up the Digital Audio System InstallationSafety First Connector TypesName Description Connects To install the 0404 PCI card into your computer Installing the E-MU 0404 PCI CardSlots Sync Daughter Install the Sync CardCard Windows 2000 or Windows XP Software InstallationInstalling the E-MU 0404 Drivers Uninstalling all Audio Drivers and ApplicationsInstallation Software Installation Analog Output Connections PCI Card & InterfacesE-MU 0404 PCI Card Analog Breakout CablePdif Digital Audio Input & Output Digital Breakout CableAnalog Breakout CablePdif Midi Sound ModuleDigital Connections Midi CableSync Daughter Card Option Connecting Cables to the Sync Daughter CardTo Invoke the PatchMix DSP Mixer PatchMix DSP MixerPatchMix DSP Overview of the MixerPre Fader or Post Fader Mixer WindowMonitor MainToolbar MU Icon in the Windows TaskbarRight-Click Here New Session SessionSave Session Open SessionSystem Settings Session SettingsUsing External Clock PCI Card S/PDIF Input SettingsPdif Output Format Input Mixer Strips To Add a New Strip Mixer Strip CreationTo Delete a Mixer Strip Multichannel Wave Files Working with Inserts Insert SectionInput Insert MenuTo Add a Send Insert To Add a Send/Return InsertInput Asio Direct Monitor Send/ReturnRecordingPlayback To Add an Asio Direct Monitor Send/Return Meter InsertsMeter Color Indicates To Insert a Meter To Set the Input Levels of a StripMaking the Best Possible Recording Trim Pot Insert Test Tone/Signal Generator InsertTo Bypass All Inserts Managing Your InsertsTo Delete Effects from an Insert To Bypass an InsertAux Bus ChainAux Section Pan FaderPost-Fader Aux Send InputOutput Pre-Fader Aux SendLevel, Pan, Solo & Mute Controls Main Section Effect TV Screen & SelectorsOutput InputOutput Sync/Sample Rate IndicatorsAuxiliary Effects & Returns Input InputOutput Section Effect Categories Core Effects Multi-Effects EffectsOverview Effects PaletteTo Delete an Effect FX Insert ChainsTo Select an Effect To Edit an Effect88kHz, 96kHz, 176kHz & 192kHz Operation Creating, Renaming & Deleting Categories or PresetsTo Create a New Preset Category To Delete an Effect Category or PresetTo Export your FX Category Folders To Import Core FX PresetsTo Export your Core FX Presets To Import FX Category FoldersFX Edit Screen To Bypass ALL User Preset SectionTo Select a User Preset To Create a New User PresetTo Overwrite or Save a User Preset Core Effects and Effects PresetsTo Delete a User Preset To Rename a User PresetTotal Effects List of Core EffectsDSP Resource Usage ExampleLow Shelf Or… High Shelf Core Effects DescriptionsBand Para EQ Band Shelf EQBand EQ Setting up a Parametric EQMid Band High Shelf Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Filter Auto-WahChorus VCA OutCompressor Basic Controls Distortion DistortionInput Meter Flanger FlangerFreq Shifter Post Gain Leveling AmpEarly Reflections ReverberationTime Lite ReverbDelay Mono Delays 100, 250, 500, 750, 1500Rolloff LFO Phase ShifterSpeaker Simulator RotarySpeaker Type Description Stereo Delays 100, 250, 550, 750 DelayRolloff Early Reflections Late Reverb Stereo ReverbFrequency Vocal MorpherMU PowerFX To Setup & Use E-MU PowerFX Setup Cubase LEMU PowerFX Resource Availability Automating E-MU PowerFXTo Record E-MU PowerFX parameter changes in Cubase LE Application Name Compatible? Render Extra Buffers MU PowerFX Compatibility ChartTips for using Freeze Mode on Cubase LE Rendering Audio with E-MU PowerFXUsing E-MU PowerFX with WaveLab and SoundForge General Tips for Rendering using E-MU PowerFXWire VST plug-in MU VST E-WireTo Setup and use E-Wire Delay CompensatorPatchMix Delay Compensator UseDelay Units Parameter Cubase VST or CubasisPowerFX Delay Or E-Wire PowerFX Or E-WireGrouping Tracks Smpte Conversion Smpte FeaturesAppendix Sync Daughter Card SupplementSmpte Modes of Operation Host ModeExternal Mode Flywheel ModeTypes of Smpte Stripe ModeSmpte Background Time CodeFrames-per-second Resolution Why use SMPTE?Avoiding Smpte problems Smpte Subframe ResolutionMidi Time Code MTC Other Tips for using SmpteDuplicating Smpte time code House Sync Generator Digital Device Word Clock In/OutTo Synchronize PatchMix DSP to an External Clock Source Word Clock Termination on Digital MixerAdat Optical Word Clock Termination OFFExternal Device supplies Master Clock Getting in SyncPatchMix DSP supplies Master Clock Digital Cables Appearance Settings in WindowsUseful Information AES/EBU to S/PDIF Cable AdapterDynamic Range Channel Crosstalk Input Impedance Technical SpecificationsSample Rates Bit Depth Hardware DSP Converters & OpAmps Type Level Frequency ResponsePCI Card Dimensions & WeightSync Daughter Card Forums Internet ReferencesResponsible Party Declaration of ConformityTrade Name Model NoCompliance Information Numerics IndexMidi Index Midi

0404 specifications

Creative 0404 is a premium audio interface designed for musicians, podcasters, and audiophiles seeking high-quality sound reproduction and versatile connectivity options. One of its standout features is its ability to support high-resolution audio up to 24-bit/192 kHz, ensuring that every detail is captured faithfully during recording and playback. This makes it an ideal choice for those who prioritize sound clarity and depth in their projects.

The device boasts a sleek, compact design that is both portable and user-friendly. It includes a sturdy chassis that can withstand the rigors of travel while maintaining a professional appearance in studio settings. The Creative 0404 features multiple input and output options, including combo XLR/TRS inputs with switchable phantom power, allowing users to connect a variety of microphones and instruments. This flexibility is essential for those working in diverse audio environments.

One of the key technologies employed in the Creative 0404 is its high-performance DAC (digital-to-analog converter), which plays a crucial role in delivering pristine sound quality. The DAC minimizes distortion and noise, ensuring the signal integrity is retained throughout the audio chain. Additionally, the device incorporates advanced audio processing capabilities, allowing for real-time monitoring and effects.

The interface is compatible with various operating systems, including Windows and macOS, and works seamlessly with popular digital audio workstations (DAWs). This compatibility ensures that users can easily integrate the Creative 0404 into their existing workflows. Another notable feature is its low-latency performance, which is essential for live recordings and performances, enabling musicians to monitor their inputs without distractions.

Moreover, the Creative 0404 comes with a suite of software tools that enhance its usability. This includes recording, editing, and mixing software, as well as various plug-ins that allow users to expand their creative possibilities. Its straightforward controls and intuitive layout make it accessible for both beginners and seasoned professionals.

In summary, the Creative 0404 is a feature-rich audio interface that combines high-performance audio quality, versatile connectivity, and ease of use. Whether for home studios, podcasts, or live performances, it offers the tools necessary to produce professional-sounding audio effortlessly. It represents a perfect blend of technology and practicality, catering to the needs of modern audio creators.
Top Page Image Contents