Delta Electronics LCP-10G3A4EDR manual Optical Transmitter Characteristics TC = -5to

Page 3

LCP-10G3A4EDR

Optical Transmitter Characteristics (TC = -5℃to 70℃)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Data Rate	R		10.3125		Gb/s
Signaling speed variation from				±100	ppm
nominal.				±100	ppm
nominal.
Average Output Power	Pavg	-5		-1.8	dBm
Wavelength	λ	840		860	nm
Spectral Width RMS				0.45	nm
Transmitter OFF Output Power	Poff			-30	dBm
Extinction Ratio	ER	3
Optical Modulation Amplitude	OMA	Compliant with Minimum			dBm
Optical Modulation Amplitude	OMA	OMA relation table			dBm
		OMA relation table
Relative Intensity Noise	RIN			-128	dB/Hz
Optical Return Loss	ORL			12	dB
Transmitter eye mask definition		{0.25, 0.40, 0.45, 0.25, 0.28, 0.40}
{X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.40, 0.45, 0.25, 0.28, 0.40}
{X1, X2, X3, Y1, Y2, Y3}
	Transmitter eye mask definition

3	Revision: 0B
	2008/9/5
DELTA ELECTRONICS, INC.	www.deltaww.com

Image 3

Contents Applications DescriptionLow Speed Electrical Characteristics Absolute Maximum RatingsRecommended Operating Conditions Optical Transmitter Characteristics TC = -5to LOS D-LOS a Optical Receiver Characteristics Tc = -5toSFP+ Transceiver Electrical Pad Layout Link LengthModule Electrical Pin Definition Pin Logic Symbol Name/DescriptionRS0/RS1 Low speed electrical control pins and 2-wire interfaceTXFault TXDisableLCP-10G3A4EDR Recommend Circuit Schematic Latch Color Identifier Package Outline Drawing for Metal Housing with Bail de-latchTiming parameters for SFP+ management Parameter Symbol Min Max UnitEnhanced Digital Diagnostic Interface Eeprom Serial ID Memory Contents 2-Wire Address A0h Address Name Value Dec Unit Bytes Digital Diagnostic Monitoring InterfaceState/ Control Bits Optional Set of Alarm and WarningRegulatory Compliance Feature Test Method Reference Performance