Delta Electronics LCP-10G3A4EDR manual

Page 8

LCP-10G3A4EDR

the host board.

RX_LOS assert min and de-assert max are defined in the relevant standard. To avoid spurious transition of RX_LOS a minimum hysteresis of 0.5 dB is recommended.

8	Revision: 0B
	2008/9/5
DELTA ELECTRONICS, INC.	www.deltaww.com

Image 8

Contents Description ApplicationsRecommended Operating Conditions Low Speed Electrical CharacteristicsAbsolute Maximum Ratings Optical Transmitter Characteristics TC = -5to Optical Receiver Characteristics Tc = -5to LOS D-LOS aLink Length SFP+ Transceiver Electrical Pad LayoutPin Logic Symbol Name/Description Module Electrical Pin DefinitionLow speed electrical control pins and 2-wire interface TXFaultTXDisable RS0/RS1LCP-10G3A4EDR Recommend Circuit Schematic Package Outline Drawing for Metal Housing with Bail de-latch Latch Color IdentifierParameter Symbol Min Max Unit Timing parameters for SFP+ managementEnhanced Digital Diagnostic Interface Eeprom Serial ID Memory Contents 2-Wire Address A0h Digital Diagnostic Monitoring Interface Address Name Value Dec Unit BytesOptional Set of Alarm and Warning State/ Control BitsFeature Test Method Reference Performance Regulatory Compliance