Delta Electronics LCP-10G3A4EDR manual Absolute Maximum Ratings, Recommended Operating Conditions

Page 2

LCP-10G3A4EDR

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit
Storage Temperature	TS	-40		85	ºC
Supply Voltage Range @3.3V	VCC3	-0.5		3.6	V

Recommended Operating Conditions

Parameter	Symbol
Case Operating Temperature	TC
Supply Voltage @3.3V	VCC3
DC Common Mode Voltage	VCM

Min.

-5

3.135

0

Typ.	Max.	Unit
	+70	ºC
3.30	3.465	V
	3.6	V

Low Speed Electrical Characteristics

(VCC=3.135V to 3.465V)

	Parameter	Symbol	Min.
	Total Supply Current	ICC
	Power Consumption
	TX_Fault, RX_LOS	VOL	0
	TX_Fault, RX_LOS	VOH	Host_Vcc-0.5
		VOH	Host_Vcc-0.5
	TX_Disable	VIL	-0.3
	TX_Disable	VIH	2.0
		VIH	2.0
	RS0, RS1	VIL	-0.3
	RS0, RS1	VIH	2.0
		VIH	2.0

Typ.

Max.	Unit	Note
300	mA
1	W

0.4V Host_Vcc+0.3 V

0.8V 1

VccT+0.3	V	1
0.8	V	2
VccT+0.3	V	2

1.Shall be pulled up with 4.7k-10k ohms to VccT in the module.

2.Shall be pulled low to VeeT with a ＞30k ohms resistor in the module.

2	Revision: 0B
	2008/9/5
DELTA ELECTRONICS, INC.	www.deltaww.com

Image 2

Contents Description ApplicationsRecommended Operating Conditions Low Speed Electrical CharacteristicsAbsolute Maximum Ratings Optical Transmitter Characteristics TC = -5to Optical Receiver Characteristics Tc = -5to LOS D-LOS aLink Length SFP+ Transceiver Electrical Pad LayoutPin Logic Symbol Name/Description Module Electrical Pin DefinitionTXDisable Low speed electrical control pins and 2-wire interfaceTXFault RS0/RS1LCP-10G3A4EDR Recommend Circuit Schematic Package Outline Drawing for Metal Housing with Bail de-latch Latch Color IdentifierParameter Symbol Min Max Unit Timing parameters for SFP+ managementEnhanced Digital Diagnostic Interface Eeprom Serial ID Memory Contents 2-Wire Address A0h Digital Diagnostic Monitoring Interface Address Name Value Dec Unit BytesOptional Set of Alarm and Warning State/ Control BitsFeature Test Method Reference Performance Regulatory Compliance