| 4.12 | Microprocessor Fan Power Connector Pinouts | |
| 4.13 | Soft Power Connector Pinouts | |
| 4.14 | Multipurpose Connector Pinouts | 
5 Memory and Microprocessor Configuration
| 5.1 | Configuring SDRAM Memory | |
| 5.2 | Upgrading SDRAM Memory | |
| 5.3 | Increasing Microprocessor Speed | |
| 5.3.1 | Preparatory Information | |
| 5.3.2 | Required Tools | |
| 5.3.3 | Removing the 21164PC Microprocessor | |
| 5.3.4 | Installing the 21164PC Microprocessor | 
6 Interrupts and ISA Bus Addresses
| 6.1 | Interrupts | |
| 6.2 | ISA I/O Address Map | 
7 Alpha SRM Console Firmware
| 7.1 | Alpha SRM Console Firmware Conventions | |
| 7.2 | Basic Alpha SRM Console Command Descriptions | |
| 7.3 | Environment Variables for Alpha SRM Console Commands | |
| 7.3.1 | Environment Variable Descriptions | |
| 7.3.1.1 | ||
| 7.3.1.2 | ||
| 7.4 | Using the AlphaBIOS Firmware Update Utility to Update the Flash ROM | |
| 7.4.1 | AlphaBIOS Conventions | |
| 7.4.2 | Starting the AlphaBIOS | |
| 7.4.3 | Installing Alpha SRM Console Using AlphaBIOS Setup Program | |
| 7.5 | Installing the DIGITAL UNIX Operating System | |
| 7.5.1 | Requirements | 
8 Troubleshooting
| 8.1 | Hardware Startup | |
| 8.2 | Beep Codes | |
| 8.3 | Post Codes | |
| 8.4 | 
iv