Environment Variables for Alpha SRM Console Commands
Examples
show Command ExampleDescription
>>>show device |
|
|
| Lists device information, such as |
dka0.0.0.6.0 | DKA0 | RZ26L | 441A | system designation, drive model, |
dka400.4.0.6.0 | DKA400 RRD43 | 3213 | or Ethernet address. | |
dva0.0.0.0.1 | DVA0 |
|
|
|
ewa0.0.0.12.0 | EWA0 |
| ||
pka0.7.0.6.0 | PKA0 | SCSI Bus ID 7 |
| |
>>>show memory |
|
|
| Lists system |
48 Meg of System Memory |
| memory (RAM) size. | ||
>>>show * |
|
|
| Lists all environment variables |
(refer to Section 7.3) |
|
| and their settings. | |
>>>show boot* |
|
|
| Lists all environment variables, |
(refer to Section 7.3) |
|
| beginning with boot. | |
|
|
|
|
|
7.3Environment Variables for Alpha SRM Console Commands
This section describes environment variables that are used to define the system operational state and to pass information between the firmware and the operating system.
7.3.1 Environment Variable Descriptions
Environment variables are classified as either Alpha SRM Console architecture- required or