Compaq 164SX user manual Architecture-Required Environment Variables

Environment Variables for Alpha SRM Console Commands

7.3.1.1 Architecture-Required Environment Variables

The following table shows common Alpha SRM Console architecture-required environment variables and their descriptions. For a complete list, enter show * at the Alpha SRM Console prompt.

Architecture-Required Environment
Variable	Description
auto_action	When used with the set or show command, this
	variable modifies or displays the console action
	that follows an error, halt, or power-up. The
	action can be halt, boot, or restart. The default is
	halt.
boot_file	When used with the set or show command, this
	variable modifies or displays the file name to be
	used when a bootstrap requires a file name. The
	default is null.
boot_osflags	When used with the set or show command, this
	variable modifies or displays the additional
	parameters to be passed to system software. The
	default is 0.
bootdef_dev	When used with the set or show command, this
	variable modifies or displays the default device
	or device list from which the system will attempt
	to boot. If the system software is preloaded, the
	variable is preset to point to the device containing
	the preloaded software. The default is null.

Alpha SRM Console Firmware 7–19