Environment Variables for Alpha SRM Console Commands
7.3.1.2 System-Defined Environment Variables
The following table shows common Alpha SRM Console
|
| |
Environment Variable | Description | |
|
| |
console | When used with the set command, this variable modifies | |
| the console output to either the serial port or the graphics | |
| controller. | |
control_scsi_term | This variable is unused in the motherboard system. | |
ewa0_mode | This variable determines if the AUI (ThinWire) or the | |
| ||
| default. (Autosensing is not supported.) | |
os_type | When used with the set or show command, this variable | |
| modifies or displays the specified firmware that will be | |
| loaded on the next power cycle. Specify the value osf or | |
| UNIX to select the Alpha SRM Console. | |
pci_parity | This variable controls PCI parity checking. The possible | |
| values are: | |
| on | = Parity checking is enabled. |
| off | = Parity checking is disabled; this is the |
|
| default. |
| sniff = Parity checking is enabled or disabled | |
|
| depending on the PCI device. |
oem_string | When used with the set or show command, this variable | |
| modifies or displays a text string that identifies the product | |
| name in the Alpha SRM Console banner. | |
|
|
|