Installation
Before installing your monitor, place it in a convenient,
1.Remove the back panel, neck panel, then connect the blue monitor video signal cable to the back of the monitor. Tighten the screws on the end of the connector.
IMPORTANT: When connecting cables, ensure that that all cables are placed securely in the slot provided on the back of the monitor.
2.Connect the opposite end of the blue monitor video signal cable to socket on the back of the computer.
IMPORTANT: Ensure that the signal cable aligns with the
3.Connect the DC power cable from the AC (power) adapter to the back of the monitor. Connect the lime green audio (speaker) cable to the back of the monitor.
4.Connect the opposite end of the green audio (speaker) cable to the audio out connector on the rear of the computer.
5.Connect the power cord to the AC (power) adapter.
(Installation instructions continued on next page)
4