Adjusting Picture Quality
Prior to adjusting the picture, Compaq recommends that you wait 15 to 30 minutes to allow your monitor to reach maximum brightness.
Using Your On-Screen Display
The
1.If your monitor is not already on, press the power button to turn it on. (For the location of front panel control buttons, see “Operating Your Monitor” in the previous section).
2.Press the left or right Function Select Control button to display the
IMPORTANT: The OSD for your monitor may have been updated while the version number shown on all OSD menus in this user guide will stay as Version 1.00.
3.To select a function, press the left or right Function Select Control button until the function is highlighted.
4.Use the Adjustment Control
5.Press Save/Exit to save the select the new adjustment, then exit the OSD menu.
7